Abstract:In this paper, we demonstrate a simple approach of self-assembled process to form a very smooth and compacted TiO2 underlayer film from ultrafine titanium oxide (TiO2) nanocrystals with dimension of 4 nm for improving the electrical properties and device performances of dye-sensitized solar cells (DSSCs). Because the TiO2 film self-assembles by simply casting the TiO2 on fluorine-doped tin oxide (FTO) substrate, it can save a lot of materials in the process. As compared with control DSSC without the self-assembled TiO2 (SA-TiO2) layer, short-circuit current density (J(sc)) improves from 14.9 mA/cm(2) for control DSSC to 17.3 mA/cm(2) for masked DSSC with the SA-TiO2 layer. With the very smooth SA-TiO2 layer, the power conversion efficiency is enhanced from 8.22% (control) to 9.35% for the DSSCs with mask and from 9.79% (control) to 11.87% for the DSSCs without mask. To explain the improvement, we have studied the optical properties, morphology, and workfunction of the SA-TiO2 layer on FTO substrate as well as the impedance spectrum of DSSCs. Importantly, we find that the SA-TiO2 layers have better morphology, uniformity, and contact with FTO electrode, increased workfunction and optical transmission, as well as reduced charge recombination at the contact of FTO substrate contributing to the improved device performances. Consequently, our results show that the simple self-assembly of TiO2 ultrafine nanocrystals forms a very good electron extraction layer with both improved optical and electrical properties for enhancing performances of DSSCs.

Effect of the Addition of Ti3+ into TiO2 Film on the Performance of Dye Sensitized Solar Cells

Effect of the Addition of Ti<sup>3+</sup> into TiO<sub>2</sub> Film on the Performance of Dye Sensitized Solar Cells

Improved Performance of Dye Sensitized Solar Cells Using Cu-doped TiO2 As Photoanode Materials: Band Edge Movement Study by Spectroelectrochemistry

Functions of Self-Assembled Ultrafine TiO2 Nanocrystals for High Efficient Dye-Sensitized Solar Cells

Enhancement of the Photoelectric Performance of Dye-sensitized Solar Cells by Sol-gel Modified TiO2 Films

Zinc-doping in TiO 2 films to enhance photovoltaic performance of Dye-sensitized solar cells

Zinc-Doping in TiO<sub>2 </sub>Films to Enhance Photovoltaic Performance of Dye-Sensitized Solar Cells

Nanocrystalline TiO2 film with different additives for high performance dye sensitized solar cells

Effect of TiOx Compact Layer with Varied Components on the Performance of Dye-Sensitized Solar Cells

Efficiency Improvement in Dye-Sensitized Solar Cells by Modify Titanium Dioxide Formation on Supercritical Carbon Dioxide Fluid Synchronous Dyeing

Avoiding Diffusion Limitations in Cobalt(iii/ii)-Tris(2,2'-bipyridine)-based Dye-Sensitized Solar Cells by Tuning the Mesoporous TiO2 Film Properties.

SrTiO3 Modified TiO2 Electrodes and Improved Dye-Sensitized TiO2 Solar Cells

Enhanced Photoelectric Conversion Of Dye-Sensitized Solar Cell By Addition Of Inorganic Particles

BaCO3 Modification of TiO2 Electrodes in Quasi-Solid-State Dye-Sensitized Solar Cells: Performance Improvement and Possible Mechanism

Sn-Doped TiO2 Photoanode for Dye-Sensitized Solar Cells

Significant Efficiency Improvement of the Black Dye-Sensitized Solar Cell Through Protonation of Tio2 Films

ZnO/Ti3C2Tx Composite Photoanodes for Efficient Dye-Sensitized Solar Cells

Enhanced Energy Conversion Efficiency of TiO2 Electrode Modified with WO3 in Dye-Sensitized Solar Cells

Effect of Surface Protonation of Tio2 on Charge Recombination and Conduction Band Edge Movement in Dye-Sensitized Solar Cells

Fabrication of TiO2 photoelectrodes doped with copper and zirconium to improve electron generation and flow in dye-sensitized solar cell

A Planar Dithiafulvene Based Sensitizer Forming J -Aggregates on TiO 2 Photoanode to Enhance the Performance of Dye-Sensitized Solar Cells