Abstract:We report a simple and yet powerful method to improve the performance of TiO2-based N3 dye-sensitized solar cells (DSSCs) by hydrogen-treatment of TiO2 nanostructures as photoelectrodes. The solar conversion efficiency of DSSC based on TiO2 rutile nanowires was increased from 0.28% to 0.45% after the nanowire electrode was annealed at 350°C in a pure hydrogen atmosphere. The enhanced conversion efficiency was attributed to improved charge transport as a result of increased electron density by three orders of magnitude upon hydrogenation. While the conversion efficiency was improved by 61%, the overall efficiency was still low, possibly due to the limited loading of N3 dye molecules on TiO2 nanowires. To improve dye loading, a similar study of hydrogen-treated Degussa P25 nanoparticles (H-P25) electrodes was conducted in which the conversion efficiency was enhanced by 13% compared to untreated P25. The DSSC based on H-P25 achieved a very high photocurrent, 20.81mA/cm2, and solar conversion efficiency, 9.30%, under 1sun illumination. The donor density of H-P25 was found to increase by 1.5 times compared to P25, consistent with the relatively small enhancement in overall conversion efficiency. To gain new physical insight into the dye sensitization process, ultrafast transient absorption (TA) spectroscopy was applied to probe the excited dynamics of N3 dye in ethanol solution as well as adsorbed on H-P25, P25 and ZrO2. The TA spectrum of H-P25 and P25 was dominated by N3+ generated following electron injection, which occurs in <150fs. In addition, time dependent density function theory (TDDFT) calculations of N3 and N3+ provided further insight into the origin of TA spectra as well as the related dynamic processes. The results demonstrate that hydrogenation of TiO2 electrodes can be a low cost and effective way to enhance performance of DSSC by rationally introducing bandgap states that enhanced the donor density and thereby charge transport.

Improved Performance of Dye Sensitized Solar Cells Using Cu-doped TiO2 As Photoanode Materials: Band Edge Movement Study by Spectroelectrochemistry

Construction of Efficient Photoanodes for Dye Sensitized Solar Cells: TiO2 Films with a Gradient Content of Graphene

Fabrication of TiO2 photoelectrodes doped with copper and zirconium to improve electron generation and flow in dye-sensitized solar cell

Improved photovoltaic performance of dye-sensitized solar cells by Sb-doped TiO2 photoanode

Improved photovoltaic performance of dye-sensitized solar cells (DSSCs) by Zn + Mg co-doped TiO2 electrode

Enhanced Photovoltaic Performance of Dye-Sensitized Solar Cells by the Strategy of Introducing Copper(ii) Silicotungstate into Photoanode and Counter Electrode

Performance Improvement of Dye-Sensitized Solar Cell by Optimizing TiO<sub>2</sub>-Photoanode Structure

Chemically modified titanium oxide nanostructures for dye-sensitized solar cells

Sn-Doped TiO2 Photoanode for Dye-Sensitized Solar Cells

Band edge movement in dye sensitized Sm-doped TiO2 solar cells: a study by variable temperature spectroelectrochemistry

Enhancement of photoelectric conversion efficiency with sulfur-doped g-C3N4/TiO2 nanoparticles composites in dye-sensitized solar cells

Influence of the preparation conditions of TiO2 electrodes on the performance of solid-state dye-sensitized solar cells with CuI as a hole collector

ZnO/Ti<sub>3</sub>C<sub>2</sub>T<sub> x </sub> composite photoanodes for efficient dye-sensitized solar cells

Study on TiO2 Photoelectrode to Improve the Overall Performance of Dye-Sensitized Solar Cells

Bandgap engineering of CuO/TiO 2 nanocomposites and their synergistic effect on the performance of dye-sensitized solar cells

High-Performance Tio2 Photoanode With An Efficient Electron Transport Network For Dye-Sensitized Solar Cells

Zinc-doping in TiO 2 films to enhance photovoltaic performance of Dye-sensitized solar cells

ZnO/Ti3C2Tx Composite Photoanodes for Efficient Dye-Sensitized Solar Cells

Enhanced Power Conversion Efficiency in Dye-Sensitized Solar Cells with TiO2 Aggregates/nanocrystallites Mixed Photoelectrodes

Improving charge transfer properties and solar cell performance by in-doped TiO 2 as an efficient photoanode for dye-sensitized solar cells (DSSCs)

Improving Energy Transfer Efficiency of Dye-Sensitized Solar Cell by Fine Tuning of Dye Planarity