Abstract:Graphene has attracted a lot of attention because of its unique mechanical, thermal, electrical and optical properties. In this study, a double layered structured photoanode consisting of a graphene/TiO2 composite layer and a TiO2 nanoparticles (P25) underlayer was developed. The photoelectric properties of as-prepared double layer structured photoanode were studied with comparison of the anatase TiO2 photoanode. Graphene was prepared by reduction of graphene oxide (GO) under a hydrothermal conditions and graphenen/TiO2 composite semiconductor materials were prepared by mixing graphene into TiO2 paste. The effect of graphene contents in graphene/TiO2 composite layer was also investigated. After constructing double layer photoanode with proper amount of graphene, the photoanode displayed enhanced light and dye adsorption properties with higher light harvesting efficiency, lower internal resistances, faster electron transport and lower charge recombination rate, which resulted in high current density. At the optimum conditions, the DSSC exhibited a J(sc) of 15.01 mA cm(-2), a V-oc of 0.72 V, and a FF of 0.66 with the energy conversion efficiency (eta) of 7.08%, indicating a increase in J(sc) and eta respectively than that of DSSC based on pure TiO2 photoanode, which gives a Jsc of 13.25 mA cm(-2), a Voc of 0.73 V, and a FF of 0.62 with a eta of 5.94%. However, the addition of excess graphene in the composite layer led to the enhancement of charge recombination, the reduction of dye adsorption and the decrease of photoelectric conversion efficiency of DSSCs. The graphene/TiO2 composite layer in DSSCs could really enhance its efficiency after the amount of graphene was successfully optimized.

Performance Improvement of Dye-Sensitized Solar Cell by Optimizing TiO<sub>2</sub>-Photoanode Structure

Improved Performance of Dye Sensitized Solar Cells Using Cu-doped TiO2 As Photoanode Materials: Band Edge Movement Study by Spectroelectrochemistry

Construction of Efficient Photoanodes for Dye Sensitized Solar Cells: TiO2 Films with a Gradient Content of Graphene

Improvement of performance of dye-sensitized solar cell by using composite nanoparticulate photoelectrode films

Study of the TiO2 Nanofibers Network Microporous Film for Organic Dye-sensitized Solar Cells

Fabrication and Performance Optimization of Photoelectrodes for Dye-sensitized Solar Cells

High-Performance Tio2 Photoanode With An Efficient Electron Transport Network For Dye-Sensitized Solar Cells

Study on TiO2 Photoelectrode to Improve the Overall Performance of Dye-Sensitized Solar Cells

Development of Tio2 Photo-Anodes in Dye-Sensitized Solar Cells

Efficient Tio2 Nanoparticles/Nanorods Composite Electrodes for Dye-Sensitized Solar Cells

Enhanced Power Conversion Efficiency in Dye-Sensitized Solar Cells with TiO2 Aggregates/nanocrystallites Mixed Photoelectrodes

ZnO/Ti<sub>3</sub>C<sub>2</sub>T<sub> x </sub> composite photoanodes for efficient dye-sensitized solar cells

Enhanced the performance of dye-sensitized solar cells with a novel photoanode using TiO2 nanoflower clusters and nanoparticles

Photoelectric Performance Optimization of Dye-Sensitized Solar Cells Based on ZnO-TiO2 Composite Nanofibers

EFFICIENT TiO<sub>2</sub> NANOPARTICLES/NANORODS COMPOSITE ELECTRODES FOR DYE-SENSITIZED SOLAR CELLS

Progress of TiO_2 Photoanodes in Dye-Sensitized Solar Cells

Enhanced Photovoltaic Performance of Dye-Sensitized Solar Cells with TiO 2 Micro/nano-Structures As Light Scattering Layer

Effect of Graphene/TiO₂ Composite Layer on the Performance of Dye-Sensitized Solar Cells.

ZnO/Ti3C2Tx Composite Photoanodes for Efficient Dye-Sensitized Solar Cells

Enhancement of Natural Dye-Sensitized Solar Cell Efficiency Through TiO2 Hombikat UV100 and TiO2 P25 Photoanode Optimization

A Bi-layer Composite Film Based on TiO 2 Hollow Spheres, P25, and Multi-walled Carbon Nanotubes for Efficient Photoanode of Dye-sensitized Solar Cell