Abstract:Dye-sensitized solar cell (DSSC) is one of the most promising alternatives to the conventional p-n junction photovoltaic device. Here, we have explored the morphology and structure variation and the accompanying solar cell performance change of two different TiO2 beads-based photoanodes made from the same precursor. The first was synthesized hydrothermally at acidic condition whereas the second was synthesized solvothermally at slightly basic condition. The first material, referred as Bead-A with an average particle size of similar to 2.0 mu m consists of rutile and brookite TiO2 phases while the second material, Bead-B, with smaller diameter of similar to 500 nm consists solely of anatase TiO2 phase. The pertaining formation mechanisms for both materials are explored. The performances of DSSCs based on Bead-A-P25 and Bead-B-P25 bi-layer photoanodes are higher than that based on pure P25. Cell based on Bead-B showed slightly better DSSC performance than Bead-A. It becomes apparent that Bead-A is advantageous in terms of fast electron transport due to its larger particle size and the presence of 1D rutile nanorods in addition to the carbon doping. Bead-B, on the other hand, gives advantages of superior light scattering properties and high surface area for dye loading. We further improved the cell performance by combining the advantages from both materials via optimized layer arrangement. By placing larger Bead-A particles on top of the smaller Bead-B particles, the top layer suppresses carrier recombination and confines the incident light within the photoanode, essentially enhancing charge harvest and collection efficiency. The performance of DSSC based on bi-layer Bead-A and Bead-B photoanode is superior to their counterpart based on bead-P25 bi-layer films. The cell operated using this bi-layer photoanode demonstrated short-circuit current density (J(sc)) of 15.67 mA cm(-2), open circuit voltage(V-OC) of 721 mV and power conversion efficiency of 7.24%. (C) 2016 Elsevier Ltd. All rights reserved.

Improved photovoltaic performance of dye-sensitized solar cells by Sb-doped TiO2 photoanode

Improved Performance of Dye Sensitized Solar Cells Using Cu-doped TiO2 As Photoanode Materials: Band Edge Movement Study by Spectroelectrochemistry

Enhanced photovoltaic performance of dye-sensitized solar cells using a new photoelectrode material: upconversion YbF3-Ho/TiO2 nanoheterostructures

Hierarchical Submicroflowers Assembled from Ultrathin Anatase TiO2 Nanosheets As Light Scattering Centers in TiO2 Photoanodes for Dye-Sensitized Solar Cells

Construction of Efficient Photoanodes for Dye Sensitized Solar Cells: TiO2 Films with a Gradient Content of Graphene

Improved photovoltaic performance of dye-sensitized solar cells (DSSCs) by Zn + Mg co-doped TiO2 electrode

Sn-Doped TiO2 Photoanode for Dye-Sensitized Solar Cells

Enhanced open-circuit voltage of dye-sensitized solar cells using Bi-doped TiO2 nanofibers as working electrode and scattering layer

Improving charge transfer properties and solar cell performance by in-doped TiO 2 as an efficient photoanode for dye-sensitized solar cells (DSSCs)

Doped Titania Nanocrystalline Photoanodes for Efficiency Improvement of Dye-Sensitized Solar Cells

Enhanced Light Scattering and Photovoltaic Performance for Dye-Sensitized Solar Cells by Embedding Submicron SiO2/TiO2 Core/shell Particles in Photoanode

Performance Improvement of Dye-Sensitized Solar Cell by Optimizing TiO<sub>2</sub>-Photoanode Structure

Improvement of the photoelectric dye sensitized solar cell performance using Fe/S–TiO2 nanoparticles as photoanode electrode

TiO 2 Nanofibers Doped With NiS as Photoanode to Improve the Photovoltaic Conversion Efficiency of Dye-Sensitized Solar Cells

Improvement of performance of dye-sensitized solar cell by using composite nanoparticulate photoelectrode films

Photovoltaic Performance of Dye-Sensitized Solar Cell by Modification of Photoanode With PbTiO 3 –ZnFe 2 O 4 /TiO 2 Nanofibers

Open-circuit voltage improvement by using TiO2 nanotubes as a working electrode of dye-sensitized solar cell

Enhancement of photoelectric conversion efficiency with sulfur-doped g-C3N4/TiO2 nanoparticles composites in dye-sensitized solar cells

Fabrication of TiO2 photoelectrodes doped with copper and zirconium to improve electron generation and flow in dye-sensitized solar cell

TiO2 surface modification and characterization with nanosized PbS in dye-sensitized solar cells.

Bi-layer Photoanode Films of Hierarchical Carbon-Doped Brookite-Rutile TiO2 Composite and Anatase TiO2 Beads for Efficient Dye-Sensitized Solar Cells