Abstract:We report a simple and yet powerful method to improve the performance of TiO2-based N3 dye-sensitized solar cells (DSSCs) by hydrogen-treatment of TiO2 nanostructures as photoelectrodes. The solar conversion efficiency of DSSC based on TiO2 rutile nanowires was increased from 0.28% to 0.45% after the nanowire electrode was annealed at 350°C in a pure hydrogen atmosphere. The enhanced conversion efficiency was attributed to improved charge transport as a result of increased electron density by three orders of magnitude upon hydrogenation. While the conversion efficiency was improved by 61%, the overall efficiency was still low, possibly due to the limited loading of N3 dye molecules on TiO2 nanowires. To improve dye loading, a similar study of hydrogen-treated Degussa P25 nanoparticles (H-P25) electrodes was conducted in which the conversion efficiency was enhanced by 13% compared to untreated P25. The DSSC based on H-P25 achieved a very high photocurrent, 20.81mA/cm2, and solar conversion efficiency, 9.30%, under 1sun illumination. The donor density of H-P25 was found to increase by 1.5 times compared to P25, consistent with the relatively small enhancement in overall conversion efficiency. To gain new physical insight into the dye sensitization process, ultrafast transient absorption (TA) spectroscopy was applied to probe the excited dynamics of N3 dye in ethanol solution as well as adsorbed on H-P25, P25 and ZrO2. The TA spectrum of H-P25 and P25 was dominated by N3+ generated following electron injection, which occurs in <150fs. In addition, time dependent density function theory (TDDFT) calculations of N3 and N3+ provided further insight into the origin of TA spectra as well as the related dynamic processes. The results demonstrate that hydrogenation of TiO2 electrodes can be a low cost and effective way to enhance performance of DSSC by rationally introducing bandgap states that enhanced the donor density and thereby charge transport.

Post-modification Using Aluminum Isopropoxide after Dye-Sensitization for Improved Performance and Stability of Quasi-Solid-state Solar Cells

Alumina Post-Modification After Dye-Sensitization: Effect On The Performance Of Quasi-Solid State Solar Cells

Improved Performance of Dye Sensitized Solar Cells Using Cu-doped TiO2 As Photoanode Materials: Band Edge Movement Study by Spectroelectrochemistry

Post Modification Of Perovskite Sensitized Solar Cells By Aluminum Oxide For Enhanced Performance

Xps Study Of Aluminum Coating On Tio2 Anode Of Dye-Sensitized Solar Cells

BaCO3 Modification of TiO2 Electrodes in Quasi-Solid-State Dye-Sensitized Solar Cells: Performance Improvement and Possible Mechanism

Interface Modification Of 8-Hydroxyquinoline Aluminium With Combined Effects In Quasi-Solid Dye-Sensitized Solar Cells

Mg(Oocch3)(2) Interface Modification After Sensitization To Improve Performance In Quasi-Solid Dye-Sensitized Solar Cells

Enhanced Performance And Stability Of Polymer Solar Cells By In Situ Formed Alox Passivation And Doping

COATING EFFECT OF TiO2 PHOTOANODE FOR DYE-SENSITIZED SOLAR CELL

Solar-To-Electric Performance Enhancement by Titanium Oxide Nanoparticles Coated with Porous Yttrium Oxide for Dye-Sensitized Solar Cells

Post-assembly Atomic Layer Deposition of Ultrathin Metal-Oxide Coatings Enhances the Performance of an Organic Dye-Sensitized Solar Cell by Suppressing Dye Aggregation.

Chemically modified titanium oxide nanostructures for dye-sensitized solar cells

Efficiency Boost in Dye-Sensitized Solar Cells by Post- Annealing UV-Ozone Treatment of TiO2 Mesoporous Layer

Modification Of Tio2 Electrode With A Series Of Alkaline-Earth Carbonates: Performance Improvement Of Quasi-Solid-State Dye-Sensitized Solar Cells

Correlating the Photovoltaic Performance of Alumina Modified Dye-Sensitized Solar Cells with the Properties of Metal-Free Organic Sensitizers

Nanocomposite gel electrolyte with large enhanced charge transport properties of an I3−/I− redox couple for quasi-solid-state dye-sensitized solar cells

Optimization of Photoelectrode Introduced to Dye-Sensitized Solar Cells by Anodic Oxidative Hydrolysis

Controlling interfacial recombination in aqueous dye-sensitized solar cells by octadecyltrichlorosilane surface treatment.

Al2O3-coated SnO2/TiO2 Composite Electrode for the Dye-Sensitized Solar Cell

Enhanced performance of dye-sensitized solar cell via surface modification of mesoporous TiO2 photoanode with electrodeposited thin TiO2 layer