Abstract:Dye-sensitized solar cell (DSSC) is one of the most promising alternatives to the conventional p-n junction photovoltaic device. Here, we have explored the morphology and structure variation and the accompanying solar cell performance change of two different TiO2 beads-based photoanodes made from the same precursor. The first was synthesized hydrothermally at acidic condition whereas the second was synthesized solvothermally at slightly basic condition. The first material, referred as Bead-A with an average particle size of similar to 2.0 mu m consists of rutile and brookite TiO2 phases while the second material, Bead-B, with smaller diameter of similar to 500 nm consists solely of anatase TiO2 phase. The pertaining formation mechanisms for both materials are explored. The performances of DSSCs based on Bead-A-P25 and Bead-B-P25 bi-layer photoanodes are higher than that based on pure P25. Cell based on Bead-B showed slightly better DSSC performance than Bead-A. It becomes apparent that Bead-A is advantageous in terms of fast electron transport due to its larger particle size and the presence of 1D rutile nanorods in addition to the carbon doping. Bead-B, on the other hand, gives advantages of superior light scattering properties and high surface area for dye loading. We further improved the cell performance by combining the advantages from both materials via optimized layer arrangement. By placing larger Bead-A particles on top of the smaller Bead-B particles, the top layer suppresses carrier recombination and confines the incident light within the photoanode, essentially enhancing charge harvest and collection efficiency. The performance of DSSC based on bi-layer Bead-A and Bead-B photoanode is superior to their counterpart based on bead-P25 bi-layer films. The cell operated using this bi-layer photoanode demonstrated short-circuit current density (J(sc)) of 15.67 mA cm(-2), open circuit voltage(V-OC) of 721 mV and power conversion efficiency of 7.24%. (C) 2016 Elsevier Ltd. All rights reserved.

Al2O3-coated SnO2/TiO2 Composite Electrode for the Dye-Sensitized Solar Cell

Enhance the performance of dye-sensitized solar cells by co-sensitization of 2,6-bis(iminoalkyl)pyridine and N719

Composite Electrode Sno2/Tio2 For Dye-Sensitized Solar Cells

ZnO/TiO2 Composite Photoanodes for Efficient Dye-Sensitized Solar Cells

TiO2-Coated Nanoporous SnO2 Electrodes for Dye-Sensitized Solar Cells

ZnO/Ti3C2Tx Composite Photoanodes for Efficient Dye-Sensitized Solar Cells

A Low Cost Mesoporous Carbon/sno2/tio2 Nanocomposite Counter Electrode for Dye-Sensitized Solar Cells

Nanoporous TiO2/SnO2/Poly(3,4-ethylene-dioxythiophene): Polystyrenesulfonate Composites As Efficient Counter Electrode for Dye-Sensitized Solar Cells

A Zno/Tio2 Composite Nanorods Photoanode with Improved Performance for Dye-Sensitized Solar Cells

TiO2-coated ultrathin SnO2 nanosheets used as photoanodes for dye-sensitized solar cells with high efficiency

Enhancing the performance of dye-sensitized solar cells: doping SnO2 photoanodes with Al to simultaneously improve conduction band and electron lifetime

Sn-Doped TiO2 Photoanode for Dye-Sensitized Solar Cells

Impacts of ZnO/TiO<sub>2</sub> Assorted Electrode on Photoelectric Characteristics of Dye-Sensitized Solar Cells

Performance Improvement of Dye-Sensitized Solar Cell by Optimizing TiO<sub>2</sub>-Photoanode Structure

Porous Tin Oxide Nanosheets with Enhanced Conversion Efficiency As Dye-Sensitized Solar Cell Electrode

Bi-layer Photoanode Films of Hierarchical Carbon-Doped Brookite-Rutile TiO2 Composite and Anatase TiO2 Beads for Efficient Dye-Sensitized Solar Cells

Conveniently Fabricated Heterojunction Zno/Tio2 Electrodes Using Tio2 Nanotube Arrays for Dye-Sensitized Solar Cells

High-efficiency Dye-Sensitized Solar Cells Based on the Composite Photoanodes of SnO2 Nanoparticles/zno Nanotetrapods.

Impacts of ZnO/TiO 2 Assorted Electrode on Photoelectric Characteristics of Dye-Sensitized Solar Cells

TiO2 coated urchin-like SnO2 microspheres for efficient dye-sensitized solar cells

A novel TiO2 nanowires/nanoparticles composite photoanode with SrO shell coating for high performance dye-sensitized solar cell