Abstract:In this paper, we reviewed recent systematic studies of using ZnO nanotetrapods for photoanodes of dye-sensitized solar cells (DSSCs) in our group. First, the efficiency of power conversion was obtained by more than 3.27% by changes of conditions of dye loading and film thickness of ZnO nanotetrapod. Short-circuit photocurrent densities (J sc) increased with the film thickness, J sc would not be saturation even the film thickness was greater than 35 μm. The photoanode architecture had been charactered by good crystallinity, network forming ability, and limited electron-hopping interjunctions. Next, DSSCs with high efficiency was devised by infiltrating SnO2 nanoparticles into the ZnO nanotetrapods photoanodes. Due to material advantages of both constituents described as above, the composite photoanodes exhibited extremely large roughness factors (RF s), good charge collection, and tunable light scattering properties. By varying the composition of the composite photoanodes, we had achieved an efficiency of 6.31% by striking a balance between high efficiency of charge collection for SnO2 nanoparticles rich films and high light scattering ability for ZnO nanotetrapods rich films. An ultrathin layer of ZnO was found to form spontaneously on the SnO2 nanoparticles, which primarily was responsible for enhancing open-circuit photovoltage (V oc). We also identified that recombination in SnO2/ZnO composite films was mainly determined by ZnO shell condition on SnO2, whereas electron transport was greatly influenced by the morphologies and sizes of ZnO crystalline additives. Finally, we applied the composite photoanodes of SnO2 nanoparticles/ZnO nanotetrapods to flexible DSSCs by low temperature technique of “acetic acid gelation-mechanical press-ammonia activation.” The efficiency has been achieved by 4.91% on ITO-coated polyethylenenaphtalate substrate. The formation of a thin ZnO shell on SnO2 nanoparticles, after ammonia activation, was also found to be critical to boosting V oc and to improving inter-particles contacts. Mechanical press, apart from enhancing film durability, also significantly improved charge collection. ZnO nanotetrapods had been demonstrated to be a better additive than ZnO particles for the improvement of charge collection in SnO2/ZnO composite photoanodes regardless of whether they were calcined.

ZnO/TiO2 Composite Photoanodes for Efficient Dye-Sensitized Solar Cells

ZnO/Ti3C2Tx Composite Photoanodes for Efficient Dye-Sensitized Solar Cells

Photoelectric Performance Optimization of Dye-Sensitized Solar Cells Based on ZnO-TiO2 Composite Nanofibers

Growth of ZnO/TiO2 Nanostructured Composite Films and Its Application in Dye-Sensitized Solar Cells

High-efficiency Dye-Sensitized Solar Cells Based on the Composite Photoanodes of SnO2 Nanoparticles/zno Nanotetrapods.

TiO2/ZnO-based composite thin films coated on FTO surface by screen printing method: increasing dye-sensitized solar cell performance

Synthesis of zinc oxide and tin oxide (ZnO/SnO2) nanocomposite for photoanode applications in dye sensitized solar cell

Al2O3-coated SnO2/TiO2 Composite Electrode for the Dye-Sensitized Solar Cell

Synthesis of Zn-doped TiO2 nano-particles using metal Ti and Zn as raw materials and application in quantum dot sensitized solar cells

Photoelectric Properties of Three-Dimensional Urchin-Like Zinc Oxide/titanium Dioxide Composite Micronanostructures

Titanium Dioxide-Coated Zinc Oxide Nanorods as an Efficient Photoelectrode in Dye-Sensitized Solar Cells

Improvement of performance of dye-sensitized solar cell by using composite nanoparticulate photoelectrode films

Polydisperse Spindle-Shaped ZnO Particles with Their Packing Micropores in the Photoanode for Highly Efficient Quasi-Solid Dye-Sensitized Solar Cells

ZnO nanocones with high-index {101̄1} facets for enhanced energy conversion efficiency of dye-sensitized solar cells

Dye-sensitized solar cells based on ZnO nanotetrapods

Impacts of ZnO/TiO<sub>2</sub> Assorted Electrode on Photoelectric Characteristics of Dye-Sensitized Solar Cells

Zinc-doping in TiO 2 films to enhance photovoltaic performance of Dye-sensitized solar cells

ZnO Nanocones with High-Index {101̅1} Facets for Enhanced Energy Conversion Efficiency of Dye-Sensitized Solar Cells

Hybrid TiO2–SnO2 Nanotube Arrays for Dye-Sensitized Solar Cells

Zinc-Doping in TiO<sub>2 </sub>Films to Enhance Photovoltaic Performance of Dye-Sensitized Solar Cells

ZnO/TiO 2 Core–shell Nanowire Arrays for Enhanced Dye-Sensitized Solar Cell Efficiency