Abstract:As the electron transport layer of dye-sensitized solar cells (DSSCs), the photoanode is an important component that affects photoelectric conversion efficiency (PCE). The commonly used material titanium dioxide (TiO2) is difficult to prepare as nanostructures with large specific surface area, which affects dye loading and electrolyte diffusion. Herein, TiO2 nanofibers and ZnO-TiO2 composite nanofibers with different molar ratios are synthesized by electrospinning technology. The above nanofibers are coated on photoanodes by the doctor blade method to assemble DSSCs. The influence of the composite ratio of ZnO-TiO2 composite nanofibers on the photoelectric performance of the assembled DSSCs is explored. The ZnO-TiO2 composite nanofibers with a molar ratio of 1 : 2 have large specific surface area and porosity and have the smallest charge transfer resistance at the photoanode-electrolyte interface. The PCE of the nanofiber-modified DSSCs reaches a maximum of 3.66%, which is 56% higher than that of the TiO2 nanofiber-modified DSSCs. The photovoltaic parameters such as open circuit voltage (VOC), current density (JSC), and fill factor (FF) are 0.58 V, 10.36 mA/cm2, and 0.61, respectively. Proper compounding of zinc oxide (ZnO) can not only make the nanofibers absorb more dyes and enhance the light-harvesting ability but also improve the diffusion of the electrolyte and enhance the electron transport, thus successfully improving the power conversion efficiency of DSSCs.

TiO2/ZnO-based composite thin films coated on FTO surface by screen printing method: increasing dye-sensitized solar cell performance

ZnO/TiO2 Composite Photoanodes for Efficient Dye-Sensitized Solar Cells

Synthesis of Cauliflower-Like ZnO–TiO2 Composite Porous Film and Photoelectrical Properties

ZnO/Ti<sub>3</sub>C<sub>2</sub>T<sub> x </sub> composite photoanodes for efficient dye-sensitized solar cells

ZnO/Ti3C2Tx Composite Photoanodes for Efficient Dye-Sensitized Solar Cells

Photoelectric Performance Optimization of Dye-Sensitized Solar Cells Based on ZnO-TiO2 Composite Nanofibers

Growth of ZnO/TiO2 Nanostructured Composite Films and Its Application in Dye-Sensitized Solar Cells

ZnO Microsheet Modified TiO2 Nanoparticle Composite Films for Dye-Sensitized Solar Cells

TiO<sub>2</sub> micro/nano-composite structured electrodes for quasi-solid-state dye-sensitized solar cells

TiO 2 Film Decorated with Highly Dispersed Polyoxometalate Nanoparticles Synthesized by Micelle Directed Method for the Efficiency Enhancement of Dye-Sensitized Solar Cells

Effect of Ultra-Thin ZnO Coating Layer on the Device Performance of TiO2 Dye Sensitized Solar Cell

Improvement of performance of dye-sensitized solar cell by using composite nanoparticulate photoelectrode films

ZnO NANOPOROUS DISK–TiO2 NANOPARTICLE HYBRID FILM ELECTRODE FOR DYE-SENSITIZED SOLAR CELLS

Zinc-doping in TiO 2 films to enhance photovoltaic performance of Dye-sensitized solar cells

Study of the TiO2 Nanofibers Network Microporous Film for Organic Dye-sensitized Solar Cells

Dye Sensitized Solar Cells Based on ZnO Nanorod/TiO<sub>2</sub> Nanoparticle Composite Films

<font>ZnO</font> NANOPOROUS DISK–<font>TiO</font><sub>2</sub> NANOPARTICLE HYBRID FILM ELECTRODE FOR DYE-SENSITIZED SOLAR CELLS

Zinc-Doping in TiO<sub>2 </sub>Films to Enhance Photovoltaic Performance of Dye-Sensitized Solar Cells

Synthesis of Zn-doped TiO2 nano-particles using metal Ti and Zn as raw materials and application in quantum dot sensitized solar cells

A Zno/Tio2 Composite Nanorods Photoanode with Improved Performance for Dye-Sensitized Solar Cells

Study on nano film of TiO2 and ZnFe2O4 composite prepared by dip coating method