Abstract:As the electron transport layer of dye-sensitized solar cells (DSSCs), the photoanode is an important component that affects photoelectric conversion efficiency (PCE). The commonly used material titanium dioxide (TiO2) is difficult to prepare as nanostructures with large specific surface area, which affects dye loading and electrolyte diffusion. Herein, TiO2 nanofibers and ZnO-TiO2 composite nanofibers with different molar ratios are synthesized by electrospinning technology. The above nanofibers are coated on photoanodes by the doctor blade method to assemble DSSCs. The influence of the composite ratio of ZnO-TiO2 composite nanofibers on the photoelectric performance of the assembled DSSCs is explored. The ZnO-TiO2 composite nanofibers with a molar ratio of 1 : 2 have large specific surface area and porosity and have the smallest charge transfer resistance at the photoanode-electrolyte interface. The PCE of the nanofiber-modified DSSCs reaches a maximum of 3.66%, which is 56% higher than that of the TiO2 nanofiber-modified DSSCs. The photovoltaic parameters such as open circuit voltage (VOC), current density (JSC), and fill factor (FF) are 0.58 V, 10.36 mA/cm2, and 0.61, respectively. Proper compounding of zinc oxide (ZnO) can not only make the nanofibers absorb more dyes and enhance the light-harvesting ability but also improve the diffusion of the electrolyte and enhance the electron transport, thus successfully improving the power conversion efficiency of DSSCs.

Growth of ZnO/TiO2 Nanostructured Composite Films and Its Application in Dye-Sensitized Solar Cells

ZnO/TiO2 Composite Photoanodes for Efficient Dye-Sensitized Solar Cells

Growth of Nanocrystalline Tio2 Films by Pulsed-Laser-Induced Liquid-Deposition Method and Preliminary Applications for Dye-Sensitized Solar Cells

TiO2/ZnO-based composite thin films coated on FTO surface by screen printing method: increasing dye-sensitized solar cell performance

ZnO nanotube-based dye-sensitized solar cell and its application in self-powered devices.

The Preparation of TiO2 Nanotube by ZnO Nanorod Template Method and Application in Dye-Sensitized Solar Cells

Synthesis of Zn-doped TiO2 nano-particles using metal Ti and Zn as raw materials and application in quantum dot sensitized solar cells

Flower-like Nanostructured ZnO for Dye-Sensitized Solar Cell Applications

Fabrication of MgO-Coated TiO_2 Nanowires Films and Application in Dye-Sensitized Solar Cells

Photoelectric Performance Optimization of Dye-Sensitized Solar Cells Based on ZnO-TiO2 Composite Nanofibers

Growth of TiO2 Nanoflowers Photoanode for Dye-Sensitized Solar Cells

In Situ Growth of Zinc Oxide Nanoribbons Within the Interstices of a Zinc Stannate Nanoplates Network on Compacted Woven Metal Wires and Their Enhanced Solar Energy Application

Fabrication of MgO Coated TiO2 Nanowires Films and Application in Dye Sensitized Solar Cells

Application of Nano-crystalline ZnO Thin Films to Dye-sensitized Solar Cell

TiO2 Coated ZnO Nanorods by Mist Chemical Vapor Deposition for Application as Photoanodes for Dye-Sensitized Solar Cells

Growth of Flower-Like Sno2 Crystal and Performance As Photoanode in Dye-Sensitized Solar Cells

ZnO/TiO 2 Core–shell Nanowire Arrays for Enhanced Dye-Sensitized Solar Cell Efficiency

Facile synthesis of ZnO micro-nanostructures with controllable morphology and their applications in dye-sensitized solar cells

Nanostructured SnO2 Photoanode-Based Dye-Sensitized Solar Cells

Solvent assisted evolution and growth mechanism of zero to three dimensional ZnO nanostructures for dye sensitized solar cell applications

Facial Synthesis of SnO2 Nanoparticle Film for Efficient Fiber-Shaped Dye-Sensitized Solar Cells