Abstract:Publication date: 31 July 2023 Source: Key Engineering Materials Vol. 950 Author(s): Amalia Rohmah Fajariah, Euis Siti Nurazizah, Ferry Faizal, Lusi Safriani Recently, dye sensitized solar cell (DSSC) are considered to replace the previous generation of solar cells. DSSC uses an organic dye to absorb light and convert it to electricity. One-dimensional morphological structure of photoanode that provides a straight pathway for electron transport can improve the efficiency of DSSC. TiO2 nanofibers is one-dimensional structure of oxide semiconductor material commonly used as photoanode in DSSC. A simple method to synthesis continuous nanofiber is electrospinning method that use the influence of electrostatic forces. The nanofiber's diameter that produced by electrospinning method depends on several parameters, one of which is the applied voltage. This study reports the synthesis of TiO2 nanofibers with varying the applied voltages from 10 kV to 14 kV and their performance as photoanode in DSSC. TiO2 nanofibers were electrospun directly onto a TiO2-coated fluorine tin oxide (FTO) substrate from a mixture of titanium (IV) propoxide (TTIP), triton X-100, acetic acid, poly (vinyl) acetate (PVAc) that were dissolved in dimethyl formamide (DMF). TiO2 nanofiber photoanodes were then immersed in ruthenium (II) dye, stacked with a counter electrode, and finally the electrolyte was injected between them. Based on the SEM results, we found that the beads disappeared with increasing applied voltage. The XRD pattern of TiO2 nanofibers indicates the presence of the anatase phase. Based on the photocurrent-voltage characteristic, TiO2 nanofibers produced by applied voltage of 14 kV shows the highest efficiency of 1.11% with JSC 4.78 mA/cm2, VOC 0.74 Volt and fill factor (FF) of 31.37%.

Facial Synthesis of SnO2 Nanoparticle Film for Efficient Fiber-Shaped Dye-Sensitized Solar Cells

Functions of Self-Assembled Ultrafine TiO2 Nanocrystals for High Efficient Dye-Sensitized Solar Cells

TiO2 coated SnO2 nanosheet films for dye-sensitized solar cells

A novel low-cost, one-step and facile synthesis of TiO2 for efficient fiber dye-sensitized solarcells

Porous Tin Oxide Nanosheets with Enhanced Conversion Efficiency As Dye-Sensitized Solar Cell Electrode

Dissymmetric interface design of SnO2/TiO2 side-by-side bi-component nanofibers as photoanodes for dye sensitized solar cells: Facilitated electron transport and enhanced carrier separation

Hybrid TiO2–SnO2 Nanotube Arrays for Dye-Sensitized Solar Cells

Facile Construction of Nanofibrous Zno Photoelectrode for Dye-Sensitized Solar Cell Applications

SnO 2 hollow nanospheres enclosed by single crystalline nanoparticles for highly efficient dye-sensitized solar cells

Facile Synthesis of a Multifunctional SnO 2 Nanoparticles/Nanosheets Composite for Dye-Sensitized Solar Cells

ZnO/TiO2 Composite Photoanodes for Efficient Dye-Sensitized Solar Cells

Low-Cost Fabrication of TiO2 Nanorod Photoelectrode for Dye-sensitized Solar Cell Application

Synthesis of TiO2 Nanofiber as Photoanode of Dye Sensitized Solar Cells (DSSC)

A Low Cost Mesoporous Carbon/sno2/tio2 Nanocomposite Counter Electrode for Dye-Sensitized Solar Cells

Nanostructured SnO2 Photoanode-Based Dye-Sensitized Solar Cells

In-situ solvothermal growth of Zn2SnO4 films on FTO glass towards superior dye-sensitized solar cells

A Simple and Efficient Method Using Polymer Dispersion to Prepare Controllable Nanoporous TiO2 Anodes for Dye-Sensitized Solar Cells

Sn-Doped TiO2 Photoanode for Dye-Sensitized Solar Cells

Synthesis of zinc oxide and tin oxide (ZnO/SnO2) nanocomposite for photoanode applications in dye sensitized solar cell

Fiber dye-sensitized solar cells consisting of TiO2 nanowires arrays on Ti thread as photoanodes through a low-cost, scalable route

Dye-sensitized solar cells achieved with multi-layered SnO2/ZnO composite photoanodes through precise control of thickness and composition