Abstract:A nanoporous composite film combined of conducting inorganic template (TiO2/SnO2) and conducting polymer catalyst (poly(3,4-ethylenedioxythiophene):polystyrenesulfonate, PEDOT:PSS) was developed as an alternative counter electrode for dye-sensitized solar cell (DSSC) through low temperature process. The TiO2/SnO2 template was first fabricated by coating a homogeneous TiO2 nanoparticles. blended paste containing a SnCl4 aqueous solution on the conductive substrate, followed by annealing at 150 degrees C. The counter electrode was then completed by spin coating the PEDOT:PSS aqueous solution into the template and drying at 80 degrees C. The obtained TiO2/SnO2/PEDOT:PSS (TSP) composite film exhibits more excellent catalytic activity for the triiodide reduction than the pristine PEDOT:PSS film, resulting in the significant improvements in the fill factor and efficiency of the cells. The values of the fill factor and efficiency respectively increase from 0.564 and 4.79% to 0.699 and 6.54%. Noted that the photovoltaic performances of the TSP based DSSC is very similar to those of the Pt based one. The fill factor and efficiency of the later are 0.696 and 6.48%, respectively. The outstanding properties of the TSP composite film used as the counter electrode can be ascribed to its prominent synergistic effects. In the TSP composite film, the conducting TiO2 is applied as the main skeleton material with the in-situ formed SnO2 as a binder to construct a nanoporous structure for the PEDOT:PSS coating and also to provide numerous high-speed conductive paths for the electron transportation from the substrate to the PEDOT:PSS coating, and the PEDOT:PSS adhered on the TiO2/SnO2 skeleton mainly acts as the catalyst to enlarge its surface area allowing for more active sites for the tri-iodide reduction.

Composite Electrode Sno2/Tio2 For Dye-Sensitized Solar Cells

Enhance the performance of dye-sensitized solar cells by co-sensitization of 2,6-bis(iminoalkyl)pyridine and N719

Al2O3-coated SnO2/TiO2 Composite Electrode for the Dye-Sensitized Solar Cell

A Low Cost Mesoporous Carbon/sno2/tio2 Nanocomposite Counter Electrode for Dye-Sensitized Solar Cells

ZnO/Ti3C2Tx Composite Photoanodes for Efficient Dye-Sensitized Solar Cells

TiO2-Coated Nanoporous SnO2 Electrodes for Dye-Sensitized Solar Cells

Photoelectric Performance Optimization of Dye-Sensitized Solar Cells Based on ZnO-TiO2 Composite Nanofibers

ZnO/TiO2 Composite Photoanodes for Efficient Dye-Sensitized Solar Cells

Nanoporous TiO2/SnO2/Poly(3,4-ethylene-dioxythiophene): Polystyrenesulfonate Composites As Efficient Counter Electrode for Dye-Sensitized Solar Cells

Improvement of performance of dye-sensitized solar cell by using composite nanoparticulate photoelectrode films

Synthesis of nitrogen-doped carbon dot/ tin disulfide nanosheet composite electro-catalysts for dye-sensitized solar cells

Enhancement of photocurrent of dye-sensitized solar cell by composite liquid electrolyte including NiO nanosheets.

Improving of the Photovoltaic Characteristics of Dye-Sensitized Solar Cells Using a Photoelectrode with Electrospun Porous TiO2 Nanofibers

Research on Photovoltaic Measurement and Electrochemical Impedance Spectroscopy Analysis of Dye-Sensitized Solar Cells With Modification of Photoanodes by TiO2 Nanofibers Composited With Zn2SnO4-SnO2 Under Various Illuminances

Performance Improvement of Dye-Sensitized Solar Cell by Optimizing TiO<sub>2</sub>-Photoanode Structure

Sn-Doped TiO2 Photoanode for Dye-Sensitized Solar Cells

Impacts of ZnO/TiO<sub>2</sub> Assorted Electrode on Photoelectric Characteristics of Dye-Sensitized Solar Cells

Tio2-P4vp Nanocomposite Electrolyte For Dye-Sensitized Solar Cells

Impacts of ZnO/TiO 2 Assorted Electrode on Photoelectric Characteristics of Dye-Sensitized Solar Cells

NiCo2O4/carbon nanofibers composite as an efficient counter electrode for dye-sensitized solar cells

TiO 2 Nanofibers Doped With NiS as Photoanode to Improve the Photovoltaic Conversion Efficiency of Dye-Sensitized Solar Cells