Abstract:Effects of film thickness and electrolyte concentration on the photovoltaic performance of TiO2-based dye-sensitized solar cell (DSSC) were studied. Nanocrystalline anatase TiO2 thin films with varying thicknesses (3.2–18.9μm) have been deposited on FTO/glass substrates by screen printing method as work electrodes for DSSC. The prepared samples were characterized by UV-Vis spectroscopy, Atomic Force Microscopy/Scanning Tunneling Microscopy (AFM/STM) and X-ray diffraction (XRD). The optimal thickness of the TiO2 photoanode is 13.5μm. Short-circuit photocurrent density (Jsc) increases with film thickness due to enlargement of surface area whereas open-circuit voltage decreases with increase in thickness due to increase in electron diffusion length to the electrode. However, the Jsc and Voc of DSSC with a film thickness of 18.9μm (7.5mA/cm2 and 0.687V) are smaller than those of DSSC with a TiO2 film thickness of 13.5μm (9.9mA/cm2 and 0.734V). This is because the increased thickness of TiO2 thin film resulted in the decrease in the transmittance of TiO2 thin films hence reducing the incident light intensity on the N719 dye. Photovoltaic performance also depends greatly on the redox couple concentration in iodide∖triiodide. Jsc decreases as the redox concentration increases as a result of increased viscosity of the solution which lowers ion mobility. Similarly, Voc decreases as the electrolyte concentration increases due to enhanced back electron transfer reaction. An optimum power conversion efficiency of 4.3% was obtained in a DSSC with the TiO2 film thickness of 13.5μm and redox concentration of 0.03mol dm−3 under AM 1.5G illumination at 100mW/cm2.

Electrode Interface Characteristics of TiO2 Solar Cells with Surface Modification

Enhanced Photoelectrochemical Properties of Nanocrystalline TiO2 Electrode by Surface Sensitization with CuxO Quantum Dots.

Electrodeposited Cu2O on the {101} Facets of TiO2 Nanosheet Arrays and Their Enhanced Photoelectrochemical Performance

Functions of Self-Assembled Ultrafine TiO2 Nanocrystals for High Efficient Dye-Sensitized Solar Cells

Improved Performance of Dye Sensitized Solar Cells Using Cu-doped TiO2 As Photoanode Materials: Band Edge Movement Study by Spectroelectrochemistry

Enhanced performance of dye-sensitized solar cell via surface modification of mesoporous TiO2 photoanode with electrodeposited thin TiO2 layer

SrTiO3 Modified TiO2 Electrodes and Improved Dye-Sensitized TiO2 Solar Cells

TiO2 surface modification and characterization with nanosized PbS in dye-sensitized solar cells.

Enhanced Energy Conversion Efficiency of TiO2 Electrode Modified with WO3 in Dye-Sensitized Solar Cells

BaCO3 Modification of TiO2 Electrodes in Quasi-Solid-State Dye-Sensitized Solar Cells: Performance Improvement and Possible Mechanism

TiO2-Coated Nanoporous SnO2 Electrodes for Dye-Sensitized Solar Cells

Open-circuit voltage improvement by using TiO2 nanotubes as a working electrode of dye-sensitized solar cell

Effect of TiO2 electrode thickness on photovoltaic properties of dye sensitized solar cell based on randomly oriented Titania nanotubes

Modification Of Tio2 Electrode With A Series Of Alkaline-Earth Carbonates: Performance Improvement Of Quasi-Solid-State Dye-Sensitized Solar Cells

Investigation on the Interface Modification of TiO2 Surfaces by Functional Co-Adsorbents for High-Efficiency Dye-Sensitized Solar Cells

COATING EFFECT OF TiO2 PHOTOANODE FOR DYE-SENSITIZED SOLAR CELL

Preparation of Tio2 Nanocrystalline Films by Electrophoretic Deposition and Their Application in Dye-Sensitized Solar Cells

An investigation on surface modified TiO2 incorporated with graphene oxide for dye-sensitized solar cell

EFFECTS OF TiO2 FILM THICKNESS AND ELECTROLYTE CONCENTRATION ON PHOTOVOLTAIC PERFORMANCE OF DYE-SENSITIZED SOLAR CELL

Improving Performance of an Integrated Solar Flow Battery by Cr- and Cu-Doped TiO2 Photoelectrodes

Alumina Post-Modification After Dye-Sensitization: Effect On The Performance Of Quasi-Solid State Solar Cells