Abstract:Ternary metal carbide TiAlC has been proposed as a metal gate material in logic semiconductor devices. It is a hard-to-etch material due to the low volatility of the etch byproducts. Here, a simple, highly controllable, and dry etching method for TiAlC has been first presented using nonhalogen N2/H2 plasmas at low pressure (several Pa) and 20 °C. A capacitively coupled plasma etcher was used to generate N2/H2 plasmas containing active species, such as N, NH, and H to modify the metal carbide surface. The etch rate of TiAlC was obtained at 3 nm/min by using the N2/H2 plasma, whereas no etching occurred with pure N2 plasma or pure H2 plasma under the same conditions. The surface roughness of the TiAlC film etched by N2/H2 plasma was controlled at the atomic level. A smooth etched surface was achieved with a root-mean-square roughness of 0.40 nm, comparable to the initial roughness of 0.44 nm. The plasma properties of the N2/H2 plasmas were diagnosed by using a high-resolution optical emission spectrometer, detecting the NH molecular line at 336 nm. The etching behavior and plasma-surface reaction between N2/H2 plasma and TiAlC were investigated by using in situ spectroscopic ellipsometry, in situ attenuated total reflectance-Fourier transform infrared spectrometry, and X-ray photoelectron spectroscopy. The findings indicate that the N-H, C-N, and Ti(Al)-N bonds form on the TiAlC surface etched by the N2/H2 plasmas. The mechanism for etching of TiAlC involving transformation reactions between inorganic materials (metal carbides) and inorganic etchants (N2/H2 plasma) to form volatile organic compounds such as methylated, methyl-aminated, and aminated metals is proposed. Nonhalogen or nonorganic compound etchants were used during the etching process. The study provides useful insights into microfabrication for large-scale integrated circuits.

Dry etching of AlN films using the plasma generated by fluoride

Smooth Etching of Epitaxially Grown AlN Film by Cl2/BCl3/Ar-based Inductively Coupled Plasma

Isotropic plasma-thermal atomic layer etching of aluminum nitride using SF$_6$ plasma and Al(CH$_3$)$_3$

Study of preparation of AlN Thin Films for FBAR Application by RF Sputtering

In-Flight Dry Etching of Plasma-Synthesized Silicon Nanocrystals

Dry Etching of Silicon Materials in SF 6 Based Plasmas: Roles of and Gas Additives

Nitrogen Plasma Etching and Surface Passivation of GaAs Via Plasma-Enhanced Atomic Layer Deposition

Spectroscopic Characterization of the Plasma Generated During the Deposition of AlxGa1−xN Films by Pulsed Laser Co-Ablation of Al and GaAs Targets in Electron Cyclotron Resonance Nitrogen Plasma

Ultra-violet Light Assisted Reactive RF Magnetron Sputtering Deposition of AlN Thin Films at Room Temperature

Low bias electron cyclotron resonance plasma etching of GaN, AlN, and InN

Investigation of chemical etching of AlN film with different textures by x-ray photoelectron spectroscopy

Atomic layer etching technique for InAlN/GaN heterostructure with AlN etch-stop layer

Highly Selective Dry Etching of Gan over Algan Using Inductively Coupled Cl-2/N-2/O-2 Plasmas

Dry Etching Of New Phase-Change Material Al1.3sb3te In Cf4/Ar Plasma

Effects of Fluorine Plasma Treatment on Au-Free Ohmic Contacts to Ultrathin-Barrier AlGaN/GaN Heterostructure

Oxygen-based digital etching of AlGaN/GaN structures with AlN as etch-stop layers

Low-temperature Synthesis of AlN Films Through Electron Cyclotron Resonance Plasma-Aided Reactive Pulsed Laser Deposition

Reactive ion etching of plasma enhanced chemical vapor deposition amorphous silicon and silicon nitride: Feeding gas effects

Dry Etching Characteristics of Algan/Gan Heterostructures Using Inductively Coupled H-2/Cl-2, Ar/Cl-2 and Bcl3/Cl-2 Plasmas

Nonhalogen Dry Etching of Metal Carbide TiAlC by Low-Pressure N2/H2 Plasma at Room Temperature

Low-Temperature Deposition of AlN Films\+*