Abstract:Intense heavy ion beams deposit energy very efficiently over extended volumes of solid density targets, thereby creating large samples of strongly coupled plasmas. Intense beams of energetic heavy ions are therefore an ideal tool to research this interesting field. It is also possible to design experiments using special beam–target geometries to achieve low-entropy compression of samples of matter. This type of experiments is of particular interest for studying the problem of hydrogen metallization. In this paper we present a design study of such a proposed experiment that will be carried out at the future heavy ion synchrotron facility SIS100, at the Gesellschaft für Schwerionenforschung, Darmstadt. This study has been done using a two-dimensional hydrodynamic computer code. The target consists of a solid hydrogen cylinder that is enclosed in a thick shell of lead whose one face is irradiated with an ion beam which has an annular (ring shaped) focal spot. The beam intensity and other parameters are considered to be the same as expected at the future SIS100 facility. The simulations show that due to multiple shock reflection between the cylinder axis and the lead–hydrogen boundary, one can achieve up to 20 times solid density in hydrogen while keeping the temperature as low as a few thousand K. The corresponding pressure is of the order of 10 Mbar. These values of the physical parameters lie within the range of theoretically predicted values for hydrogen metallization. We have also carried out a parameter study of this problem by varying the target and beam parameters over a wide range. It has been found that the results are very insensitive to such changes in the input parameters.

Experimental study on melting and evaporation of metal exposed to intense hydrogen ion beam

Monte Carlo/molecular Dynamics Simulation on Melting and Evaporating Processes of Material Due to Laser Irradiation

Numerical Analysis of Melting and Evaporation Behavior of Molybdenum Layer Irradiated with a Laser Beam.

Molecular Dynamics Simulation of Atomic Beam Bombardment on a Solid Surface

Thermohydraulic experiments on a water jet into vacuum during ingress of coolant event in a fusion experimental reactor

The numerical simulation of melting and evaporation due to ultrashort pulse laser irradiation

Nanostructure Evolution and Surface Modification of Tungsten Exposed to Low Energy, High Flux Deuterium Plasma

Molecular Dynamics Simulation Of Ultra-Fast Thermal Transition In Thin Foil Irradiated By High Power Ultra-Short Laser

Investigation of Hydrogen Behavior in Tungsten Exposed to High Energy Hydrogen Plasma

Numerical study on evolution of temperature field in tungsten irradiated by high-intensity pulsed ion beam

The Creation of Strongly Coupled Plasmas Using an Intense Heavy Ion Beam: Low-Entropy Compression of Hydrogen and the Problem of Hydrogen Metallization

Experimental Investigation on High Heat Flux Plasma Parameters of HIT-PSI Device in Argon Discharges

Diagnostics of Metal Plasma in Radio Frequency Glow Discharge During Electron Beam Evaporation

Pulsed Electron-Beam Melting of a Copper — Steel 316 System: Evolution of the Chemical Composition, Microstructure, and Properties

Intense Heavy Ion Beam-Induced Material Evaporation and the Resulting Dynamic Vacuum Deterioration of the Beam Line

Microstructural modification of highly porous resolidified tungsten in heat flux of 46.3 GW/m 2 and focused ion beam

Extending the Range of Measurement of Thermal Imaging Diagnostics of a High-Intensity Pulsed Ion Beam

Surface Melting and Evaporation of Pure Mg Bombarded by High Current Pulsed Electron Beam

High Heat Flux Testing of Doped and Coated Graphite Using High-Intensity Pulsed Ion Beam

Heavy-ion beam heated tantalum and tungsten near melting

Pulsed Electron-Beam Melting of Cu-Steel 316 System : Evolution of Chemical Composition and Properties 1