Abstract:We studied crystallization behaviors of amorphous C-Sb films to evaluate their applicability in phase-change memory. C-Sb thin-films with 92 to 50 at% Sb were deposited by co-sputtering from elemental targets. In-situ electrical resistance-temperature measurement, differential thermal analysis, and grazing-incident X-ray diffraction were applied in this work. Kinetics of crystallization was explored using Kissinger's non-isothermal method and Arrhenius' isothermal method, respectively. As-deposited C-Sb films are amorphous whose electrical resistance decreases as increasing temperature with a 4 to 3 orders-of-magnitude drop at the crystallization temperature. The crystallization temperature increases from 263 to 275 degrees C as Sb content decreases from 90 to 83 at%. The melting temperature remains almost unchanged, 624 degrees C, denoting the melting of Sb. The activation energy of crystallization increases from 3.37 eV (90 at% Sb) to 3.88 eV (83% Sb). Structure of C-Sb films after full crystallization belongs to R (3m) over bar Sb phase. The temperature corresponding to 10-year data-retention of 87 at% Sb films is 168. Electrical switching characterized using a memory-device made of 87 at% Sb film works smoothly at voltages with 50 ns pulse-width, set at 1.1 V and reset at 2.8 V. Binary C-Sb materials, being compatible with CMOS processing, are predicted to be promising candidates for use as phase-change memory.

Phase-Change Memory Device Using Si-Sb-Te Film for Low Power Operation and Multibit Storage

Si–Sb–Te films for phase-change random access memory

Characteristics of Si-Sb-Te Films for Phase Change Memory

Study of Si-Doped Sb2te3 Films for Phase Change Memory

Ga19sb81 Film for Multi-Level Phase-Change Memory

Advantages of Sisb Phase-Change Material and Its Applications in Phase-Change Memory

One order of magnitude faster phase change at reduced power in Ti-Sb-Te

Picosecond Operation of Optoelectronic Hybrid Phase Change Memory Based on Si‐Doped Sb Films

Ga2te3 Phase Change Material For Low-Power Phase Change Memory Application

Simultaneously low resistance drift and ultra‐fast phase change speed based on GeSb/Sb multi‐layer thin films

Multilayer Ge8Sb92/Ge2Sb2Te5 thin films: Unveiling distinct resistance states and enhanced performance for phase change random access memory

Nano-crystalline phase change memory with composite Si-Sb-Te film for better data retention and lower operation current

C-Sb Materials As Candidate for Phase-Change Memory

Binary Semiconductor In2te3 for the Application of Phase-Change Memory Device

Improved Phase-Change Characteristics of Si Doped Gesbte Thin Films Used for Phase Change Memory

Si Doping in Ge2Sb2Te5 Film to Reduce the Writing Current of Phase Change Memory

Characteristics of Si-doped Sb2Te3 thin films for phase-change random access memory

Outstanding phase-change behaviors of GaGeSbTe material for phase-change memory application

Design of Multi-States Storage Medium for Phase Change Memory

Characteristics of Ga–Sb–Te Films for Phase-Change Memory

Pulse Voltage Induced Phase Change Characteristics of the ZnxSbyTez Phase-Change Prototype Device