Abstract:Non-volatile memory, which can simultaneously store data and compute in memory, is a promising candidate to break through “memory bottleneck”. However, its operation speed and thermal stability are still contradictory and difficult to meet the requirement of in-memory computing especially in high-temperature applications. In this work, optoelectronic hybrid phase-change memory based on Cr doped Ge2Sb2Te5 material is proposed, where the picosecond laser is used to perform the information recording/erasing operation based on the reversible phase-change characteristics while resistance signal is detected to realize the information readout. Results imply that the Cr doped Ge2Sb2Te5 film with Cr concentration of 10.7 at. % has high crystallization temperature (289 °C) and ten-year data-retention temperature (221 °C), low density-change rate (2.3%) and small resistance drift coefficients (0.022 at 85 °C, 0.056 at 120 °C, 0.070 at 150 °C, and 0.00131 for the laser induced SET state). The corresponding memory device has the SET/RESET operation speeds of as fast as 1820 ps/13 ps accompanied by the RESET/SET resistance ratio of higher than two orders of magnitude. The structural analyses indicate that Cr doping can suppress the growth of grains and reduce the grain size, improving the thermal stability of amorphous Ge2Sb2Te5 thin film while the octahedral/defective octahedral motif ensures its fast phase-change speed. Therefore, Cr doped Ge2Sb2Te5 based optoelectronic hybrid phase-change memory with superior thermal stability and ultrafast operation speed may be one of the promising solutions for in-memory computing.

Ga2te3 Phase Change Material For Low-Power Phase Change Memory Application

Outstanding phase-change behaviors of GaGeSbTe material for phase-change memory application

Gete4 As A Candidate for Phase Change Memory Application

Characteristics of TeGa$_{2}$Sb$_{14}$ Thin Films for Phase-Change Memory

Materials For Phase-Change Memory With Elevated Temperature Stability

Ga<sub>2</sub>Te<sub>3</sub>Sb<sub>5</sub>-A Candidate for Fast and Ultralong Retention Phase-Change Memory

Thermal Properties And Structure Of Tega2sb7 Thin Films For Phase-Change Memory

The Phase Change Memory Features High-Temperature Characteristic Based on Ge-Sb-Se-Te Alloys

The Use of Ga16Sb84 Alloy for Electronic Phase-Change Memory

Characteristics of Si-Sb-Te Films for Phase Change Memory

The Performance of Ge2Sb2Te5 Material and Nonvolatile Phase-Change-memory Device

Characteristics of Ga–Sb–Te Films for Phase-Change Memory

Ga19sb81 Film for Multi-Level Phase-Change Memory

Thermal stability and high speed for optoelectronic hybrid phase-change memory based on Cr doped Ge2Sb2Te5 thin film

Effects of Germanium and Nitrogen Incorporation on Crystallization of N-Doped Ge2+Xsb2te5 (X=0,1) Thin Films for Phase-Change Memory

Crystallization behavior of MnTe/GeTe stacked thin films for multi-level phase change memory

Te-Free SiSb Phase Change Material for High Data Retention Phase Change Memory Application

Study of Si-Doped Sb2te3 Films for Phase Change Memory

Si–Sb–Te films for phase-change random access memory

Crystallization Kinetics of Amorphous Ga-Sb Films Extended for Phase-Change Memory

Preparation and Characterization of Gete4 Thin Films As A Candidate for Phase Change Memory Applications