Abstract:Using Fe-MgO, Co-MgO and Ni-MgO catalysts preparated by citric acid method, carbon nanotubes (CNTs) were synthesized from decomposition of methane at 873 K, 973 K and 1013 K, respectively, and were characterized by TEM and Raman spectra. The effects of catalysts, preparation temperature and reaction time on the shape, yield and inter - structure of carbon nanotubes were discussed.TEM results and Raman spectra show that the shapes and inter-structures of carbon nanotubes produced on different catalysts at the same temperature are quite different. Carbon nanotubes synthesized on Fe-MgO incline to be rods, with very thick wall, and the diameter varied greatly from 10 nm to 80 nm. However, the diameter of carbon nanotubes produced on Co-MgO is about 35 nm, and about 20 nm on Ni-MgO. As can see from the Raman spectra, the G peaks of carbon nanotubes produced on the three catalysts shift slightly, which indicate the difference of the inter-structure of nanotubes.The experiments show that the yield of carbon nanotubes varied with decomposition temperature. Using Fe-MgO catalysts, yield of carbon nanotubes grows with the decomposition temperature. However, using Ni-MgO catalysts, the yield drops when the temperature increases. The reaction temperature with the largest yield of carbon nanotubes is higher than 1013 K on Fe-MgO catalysts, about 973 K on Co-MgO catalysts, and lower than 873 K on Ni-MgO catalysts, respectively.The results also show that the yield of carbon nanotubes does not increase with the decomposition time. There is a saturation time of the carbon nanotube growth. The carbon nanotubes do not grow any more when the saturation time reaches. For example, on Ni-MgO catalysts, the carbon nanotubes stop growing after decomposition of CH4 for 2 h.

Preparation of carbon nanotubes by pyrolysis of dimethyl sulfide

Influence of Mesoporous Materials on the Preparation of Carbon Nanotubes

Branched carbon nanotubes synthesized by pyrolysis of dimethyl sulfide over Fe/MgO catalyst and their luminescent property

Synthesis of Sulfur-Doped Carbon Nanotubes by Liquid Precursor

Preparation of Carbon Nanotubes at the Surface of Fe/SBA-15 Mesoporous Molecular Sieve

Synthesis and Characterization of Silicon Carbide Nanotubes

In Situ Synthesis of Cobalt Sulfide Nanostructure-Filled Carbon Nanotubes and Their Luminescence Property

Preparation and Growth Mechanism of Carbon Nanotubes Via Catalytic Pyrolysis of Phenol Resin

Single-step Synthesis of Cobalt Sulfide Nanowires Encapsulated in Carbon Nanotubes.

Catalytic Preparation of Carbon Nanotubes from Phenolic Resin Using Cobalt Nanoparticle

Large-Scale Preparation of Carbon Nanotubes Via Catalytic Pyrolysis of Phenolic Resin at Low Temperature

A New Method for Synthesizing Double-Walled Carbon Nanotubes

Preparation of Double-Walled Carbon Nanotubes

Low Temperature Synthesis of Multiwall Carbon Nanotubes from Carbonaceous Solid Prepared by Sol–gel Autocombustion

Synthesis of Carbon Nanotubes Via Fe-Catalyzed Pyrolysis of Phenolic Resin

Effect of Temperature, Pressure, and Gas Ratio of Methane to Hydrogen on the Synthesis of Double-Walled Carbon Nanotubes by Chemical Vapour Deposition

The Factors of Preparation of Carbon Nanotubes by Catalytic Decomposition of Methane

Synthesis, characterization and properties of carbon nanotubes microspheres from pyrolysis of polypropylene and maleated polypropylene

Preparation and Electrochemical Performance of Ultra-Short Carbon Nanotubes

Synthesis Of High Quality Single-Walled Carbon Nanotubes By Cvd And Effect Of Catalyst'S Acidity-Basicity On Nanotubes Growth

EXPERIMENTAL RESEARCH ON SYNTHESIS OF CARBON NANOTUBES