Abstract:In this study, the synthesis of multi-walled carbon nanotubes (MWCNTs) was carried out by chemical vapor deposition (CVD) using propane as the carbon source and Si as the catalyst support. The effect of CVD process variables such as temperature, choice of catalyst, etc on the growth behavior of nanotubes has been examined to understand the catalytic growth of CNTs. The transition metal catalysts, Fe and Ni, were used in both elemental metal form and in a metal complex form. In the case of elemental metal catalysts, the respective metals were deposited over the Si substrate using thermal evaporation following which nanotubes were synthesized by means of CVD. Subsequent studies of the synthesized carbon nanostructures employing elemental metal catalysts revealed a significant influence of the temperature and the catalyst material on the structure of CNTs. The CNTs synthesized using Ni catalyst were bamboo-like whereas the CNTs developed employing Fe catalyst were straight tubes with partial metal filling. Consequently, growth models for the different growth mechanisms have been proposed. Certain limitations of the above process have been overcome by employing spin-coating of a metal complex catalyst material on the Si substrate. The CVD synthesis of nanotubes using metal complex catalysts always resulted in partially catalyst filled CNTs. More importantly, the metal complex catalyst could be easily patterned on the Si substrate using spin-coating and photolithography, which resulted in site selective growth of partially catalyst filled MWCNTs. Since the entire process of site selective growth is suitable for conventional device fabrication, this method is a promising and practical pathway for large-scale fabrication of several magnetic material filled CNT-based devices.

Synthesis and Characterization of Silicon Carbide Nanotubes

Properties of Carbon Nano-Tubes–cf/sic Composite by Precursor Infiltration and Pyrolysis Process

Synthesis and Characterization of SiC Nanowires Using Silicon Evaporation

Growth and Characterization of Multi-Walled Carbon Nanotubes using Chemical Vapor Deposition

Narrow-chirality distributed single-walled carbon nanotube synthesized from oxide promoted Fe–SiC catalyst

Preparation of Silicon Carbide Nanowires and Nanochains Using Chemical Vapor Deposition Method

Synthesis of silicon carbide nanomaterials by microwave heating: Effect of types of carbon nanotubes

Synthesis of Silicon Carbide Nanorods Without Defects by Direct Heating Method

Studies of synthesizing the SiC nanometer powders by chemical vapor reaction

Carbon Nanotube Synthesis and Parametric Study Using CaCO3 Nanocrystals As Catalyst Support by CVD

Synthesis and Characterization of SiC Nanowires Through a Reduction−Carburization Route

Chemical Vapor Deposition of Silicon Nanoparticles on the Surface of Multiwalled Carbon Nanotubes

Large Areas of Centimeters-Long SiC Nanowires Synthesized by Pyrolysis of a Polymer Precursor by a CVD Route

Study on the silicon carbide nanorods produced from carbon nanotubes

Simultaneous growth of SiC nanowires, SiC nanotubes, and SiC/SiO2 core–shell nanocables

Syntheses and Growth Mechanisms of 3C-Sic Nanostructures from Carbon and Silicon Powders.

Synthesis And Characterization Of Carbide Nanorods

Synthesis of carbon nanotubes with Ni/CNTs catalyst

Synthesis of Silicon Carbide Nanowires in a Catalyst-Assisted Process

CVD Growth of N-Doped Carbon Nanotubes on Silicon Substrates and Its Mechanism

Morphology-Controlled Synthesis of SiC Nanowires by Catalyst-Assisted Pyrolysis of Polymeric Precursor