Abstract:The engineering of high-energy lasers for applications such as the AirBorne Laser (ABL) system requires optical windows capable of handling megajoule pulse energies. The selection and/or evaluation of a suitable window material involves considerations relating to thermal lensing, i.e., the beam distortion caused by thermally induced phase aberrations, in addition to issues arising from the thermal stresses generated by beam-induced temperature gradients. We document analytical methods for evaluating the impact of beam-induced optical distortions and beam-induced mechanical stresses, which may enable the designer to properly assess the performance of window-material candidates. We illustrate the procedure in the light of an evaluation of the performance of the leading candidate for operation in the near-infrared, i.e., fused silica (SiO2). In terms of allowable peak intensities, and based on available material properties, the limiting factor is seen to be related to shear stresses generated by coating-induced axial compression that may lead to plastic deformation. The allowable beam fluence is controlled by thermally induced phase distortions rather than planar or axial stresses, thus reflecting the unusually small αE∕χ ratio of fused SiO2, where αE represents the thermal stress factor, and χ designates the optical distortion coefficient. In conjunction with an evaluation of the required window thickness as a function of the diameter, our analysis leads to the conclusion that operating the ABL system at the projected power level (2MW) and pulse duration (5s) requires bulk windows—if made of fused SiO2—of at least 20cm in diameter but no more than 7.5mm in thickness.

Micro-ablation at the front and rear surfaces of a fused silica window by using a femtosecond laser pulse in air

Traceless Mitigation of Laser Damage Precursors on a Fused Silica Surface by Combining Reactive Ion Beam Etching with Dynamic Chemical Etching

Morphological Investigation at the Front and Rear Surfaces of Fused Silica Processed with Femtosecond Laser Pulses in Air.

UV-ultrashort pulsed laser ablation of fused silica

Enhancing the Expansion of a Plasma Shockwave by Crater-Induced Laser Refocusing in Femtosecond Laser Ablation of Fused Silica

Mechanisms In Fs-Laser Ablation In Fused Silica

Efficiency of silicon micromachining by femtosecond laser pulses in ambient air

Femtosecond-Laser-Ablation Dynamics in Silicon Revealed by Transient Reflectivity Change

Effect of laser ablation on the conductivity and laser-induced damage threshold of fused silica components

High-energy laser windows: case of fused silica

Infrared Pulsed Picosecond Laser-Induced Plasma-Assisted Ablation of Micro-textures on Quartz Surface

Repair of Fused Silica Damage Using Selective Femtosecond Laser-Induced Etching

Single-crystal silicon ablation with temporally delayed femtosecond laser double-pulse trains

Comparative analysis of microlens array formation in fused silica glass by laser: femtosecond versus picosecond pulses

Laser-induced damage growth of large-aperture fused silica optics under high-fluence 351 nm laser irradiation

Liquid-Assisted Femtosecond Laser Precision-Machining of Silica.

Laser-induced damage and defect analysis of calcium fluoride window caused by the high pulse repetition rate of ArF excimer laser radiation

Femtosecond laser modification combined with chemical etching to achieve high-quality cutting of millimeter-thick fused silica

Effects of Thermal Annealing on Femtosecond Laser Micromachined Glass Surfaces

The interaction of femtosecond and nanosecond laser pulses with the surface of glass

Nanosecond pulsed laser ablation of silicon—finite element simulation and experimental validation