Abstract:The ablation threshold, depth and crater shape of fused silica for femtosecond laser processing are investigated theoretically and experimentally. Based on tracking the spatiotemporal distribution of the free electron density, free electron temperature, and laser intensity, the electron dynamics as well as the transient optical and thermophysical properties of femtosecond laser irradiated fused silica are quantitatively determined. The numerical model is validated by comparing the calculated threshold fluence, depth and crater shape of ablation with the experimentally measured ones at a wavelength of 800 nm. The free electron relaxation time at different laser fluences and pulse durations throughout the photoionization process and impact ionization process are probed. In the present work, the findings are as follows. 1) The electron relaxation time significantly affects the material optical properties and femtosecond laser energy absorption. The optical properties change dramatically. The fused silica becomes opaque for the case of laser irradiation with fluence higher than the ablation threshold. Moreover, the transition from electron-phonon collision to electron-ion collision accompanies with the femtosecond laser ablation of fused silica. 2) By using the proposed model, the experimentally observed saturation of ablation depth at high laser fluence is elucidated by the significant change of optical reflectivity and absorption coefficient. Both the results of theoretical simulation and experimental observation indicate that laser fluence has a strong influence on the shape of the ablation crater. The ablation volume increases sharply with the increase of laser fluence for femtosecond laser irradiation, compared with that for picosecond laser irradiation. 3) With the increase of femtosecond laser fluence, the ablation depth removal efficiency and ablation efficiency are both saturated, followed by slight decrements. The peak of ablation depth removal efficiency peak occurs at the femtosecond laser fluence close to 1.4 times of the ablation threshold. While the accuracy is slightly low due to the higher sensitivity of the ablation characteristics (ablation crater depth and ablation volume) to the shorter femtosecond laser pulse. For the femtosecond laser fluence higher than 3.5 times of the ablation threshold, good repeatability over a very wide fluence range can achieve accurate processing results, because a more consistent flat-bottom ablation profile tends to appear. However, the heat-affected zone leads the processing quality to degrade, compared with the scenario of femtosecond laser fluence close to the ablation threshold.

Nanosecond pulsed laser ablation of silicon—finite element simulation and experimental validation

Computational and Experimental Study of Nanosecond Laser Ablation of Crystalline Silicon

Combined Continuum-Atomistic Modeling of Ultrashort-Pulsed Laser Irradiation of Silicon

Nanosecond Pulsed Laser Ablation on Stainless Steel − Combining Finite Element Modeling and Experimental Work

The Experimental and Modeling Study of Femtosecond Laser-Ablated Silicon Surface

Femtosecond-Laser-Ablation Dynamics in Silicon Revealed by Transient Reflectivity Change

Investigation of mechanism and surface morphology on the femtosecond laser ablation of silicon nitride under different auxiliary processing environments

Hydrodynamic Simulation of Silicon Ablation by Ultrashort Laser Irradiation

Single-pulse femtosecond laser ablation of monocrystalline silicon: A modeling and experimental study

Effects of Parameters in Femtosecond Laser Micromachining on Ablation of Silicon

Thermal and non-thermal ablation mechanisms in crystalline silicon by femtosecond laser pulses: classical approach of the carrier density two temperature model

Asymmetric Femtosecond Laser Ablation of Silicon Surface Governed by the Evolution of Surface Nanostructures

The ultrashort pulse laser ablation model of silicon based on the generalized thermoelastic theory with spatio-temporal nonlocal effect

Effects of plasma confinement on the femtosecond laser ablation of silicon

Numerical Simulation of Vaporization Effect of Long Pulsed Laser Interaction with Silicon

Linearly Scaling Molecular Dynamic Modeling to Simulate Picosecond Laser Ablation of a Silicon Carbide Crystal

Theoretical and Experimental Research of Femtosecond Laser Processing Fused Silica

Efficiency of silicon micromachining by femtosecond laser pulses in ambient air

Femtosecond Laser Ablation of Silicon in Air and Vacuum

Molecular dynamics simulation study on ablation of silicon by water-jet-guided laser

Experiment-based numerical evaluation of the surface recession of C/C–SiC composites under the high-energy laser