Abstract:A study of damage and ablation of silicon induced by two individual femtosecond laser pulses of different wavelengths, 1030 and 515 nm, is performed to address the physical mechanisms of dual-wavelength ablation and reveal possibilities for increasing the ablation efficiency. The produced ablation craters and damaged areas are analyzed as a function of time separation between the pulses and are compared with monochromatic pulses of the same total energy. Particular attention is given to low-fluence irradiation regimes when the energy densities in each pulse are below the ablation threshold and thus no shielding of the subsequent pulse by the ablation products occurs. The sequence order of pulses is demonstrated to be essential in bi-color ablation with higher material removal rates when a shorter-wavelength pulse arrives first at the surface. At long delays of 30-100 ps, the dual-wavelength ablation is found to be particularly strong with the formation of deep smooth craters. This is explained by the expansion of a hot liquid layer produced by the first pulse with a drastic decrease in the surface reflectivity at this timescale. The results provide insight into the processes of dual-wavelength laser ablation offering a better control of the energy deposition into material.

Single-crystal silicon ablation with temporally delayed femtosecond laser double-pulse trains

Femtosecond Laser Double Pulses Nanofabrication on Silicon

Controlling of Surface Ablation Threshold of Fused Silica by Double-Pulsed Femtosecond Laser

Femtosecond laser induced ablation of crystalline silicon upon double beam irradiation

Effects of Parameters in Femtosecond Laser Micromachining on Ablation of Silicon

A Study on Ablation Quality of Silicon by Femtosecond Laser Pulse Trains

Asymmetric Femtosecond Laser Ablation of Silicon Surface Governed by the Evolution of Surface Nanostructures

Efficiency of silicon micromachining by femtosecond laser pulses in ambient air

Dual-wavelength femtosecond laser-induced low-fluence single-shot damage and ablation of silicon

Ablation Enhancement of Fused Silica Glass by Femtosecond Laser Double-Pulse Bessel Beam

The Experimental and Modeling Study of Femtosecond Laser-Ablated Silicon Surface

Femtosecond-Laser-Ablation Dynamics in Silicon Revealed by Transient Reflectivity Change

A Two-Step Model for Multiple Picosecond and Femtosecond Pulses Ablation of Fused Silica

Nanopatterning Of Silicon Via The Near-Field Enhancement Effect Upon Double-Pulse Femtosecond Laser Exposure

Femtosecond pulsed laser-induced ablation region development on the Surface of silicon

The influence of ultrafast temporal energy regulation on the morphology of Si surfaces through femtosecond double pulse laser irradiation

Observation of Femtosecond Laser-Induced Ablation in Crystalline Silicon

Dynamics and its modulation of laser-induced plasma and shockwave in femtosecond double-pulse ablation of silicon

Femtosecond Laser Processing of Fused Silica and Aluminum Based on Electron Dynamics Control by Shaping Pulse Trains

Ethanol-assisted Ablation of Silicon and Germanium by Temporally Shaped Femtosecond Pulses

Single-pulse femtosecond laser ablation of monocrystalline silicon: A modeling and experimental study