Abstract:Nanoindentation-based fracture toughness measurements of ceramic materials like silicon carbide (SiC) with pyramidal indenters are of significant interest in materials research. A majority of currently used fracture toughness models have been developed for Vickers indenters and are limited to specific crack geometries. The validity of the indentation-cracking method for the fracture toughness measurement of single crystal SiC, the elastic-plastic anisotropy and orientation dependence around the c-axis when indented in the direction is examined using nanoindentation with different pyramidal indenters. The residual impressions are analyzed using scanning electron microscopy to measure the crack lengths and the validity of existing fracture toughness measurement methods and equations is analyzed. A combination of nanoindentation with different pyramidal indenters to produce a wide range of effective strains and finite element simulation is used to extract flow properties of single crystal SiC in the direction. It is observed that there is no orientation dependence around the c-axis when SiC-6H is indented in the direction with a Berkovich indenter, i.e., it is transversely isotropic. It is also found that for a Berkovich indenter, the Jang and Pharr model, which is based on the Lawn model for cone/halfpenny cracks, gives approximately constant values at low loads ( 1 N), the Laugier model gives constant fracture toughness values. Finite element analysis using equivalent cones is used along with measured hardness values to estimate the yield strength, the work hardening exponents and the stress–strain curve for single crystal SiC-6H in the direction.

Characterization of R-curve Behavior in Si3N4-based Ceramics

R-curve Behavior of Indentation Cracks in Silicon Nitride Based Ceramic Composite

Crack-Location-Dependent R-Curve Behavior in Si3n4

Study on the Model of Surface Crack Depth in Ceramics Grinding

R-curve Behavior of Laminated SiC/BN Ceramics

New Route to Improve the Fracture Toughness and Flexural Strength of Si3N4 Ceramics by Adding FeSi2

R-curve Behavior, Mechanical Properties and Microstructure of Sintered ZrB2–SiCp–ZrO2f Ceramics

Strength/Crack-Size Relationship for Knoop-Indented Bending Specimens and Its Application to Silicon Nitride Ceramics

R-curve Behavior of Laminated ZrB2–SiC Ceramic with Strong Interfaces

DAMAGE RESISTANCE OF SiC/BN LAMINATED CERAMICS

Computer simulation of R-curve behaviour in ZrO2-Y2O3 ceramics

Fracture Toughness Evaluation and Plastic Behavior Law of a Single Crystal Silicon Carbide by Nanoindentation

R-CURVE BEHAVIOR AND THERMAL SHOCK RESISTANCE FOR Al2O3 CERAMIC MATRIX COMPOSITES

Weibull modulus of fracture strength of toughened ceramics subjected to small-scale contacts

R-curve behavior of Si3N4 whisker-reinforced Si3N4 matrix composites

R-Curve Determination of 3Y-Psz by the Indentation Strength-In-Bending Method

The Effects of β-Si<sub>3</sub>N<sub>4</sub> Whisker Content and Orientation on R-Curve Behaviors of Si<sub>3</sub>N<sub>4</sub> Ceramics

The Effects of β-Si<sub>3</sub>N<sub>4</sub> Whisker Content and Orientation on R-Curve Behaviors of Si<sub>3</sub>N<sub>4</sub> Ceramics

Statistical properties of indentation toughness for silicon nitride ceramic

Crack propagation in silicon nitride ceramics under various temperatures and grain boundary toughness

On the Local Crack Resistance of Al2O3–TiC Composites Evaluated by Direct Indentation Method

Characterization of R-curve Behavior in Si3N4-based Ceramics

R-curve Behavior of Indentation Cracks in Silicon Nitride Based Ceramic Composite

Crack-Location-Dependent R-Curve Behavior in Si3n4

Study on the Model of Surface Crack Depth in Ceramics Grinding

R-curve Behavior of Laminated SiC/BN Ceramics

New Route to Improve the Fracture Toughness and Flexural Strength of Si3N4 Ceramics by Adding FeSi2

R-curve Behavior, Mechanical Properties and Microstructure of Sintered ZrB2–SiCp–ZrO2f Ceramics

Strength/Crack-Size Relationship for Knoop-Indented Bending Specimens and Its Application to Silicon Nitride Ceramics

R-curve Behavior of Laminated ZrB2–SiC Ceramic with Strong Interfaces

DAMAGE RESISTANCE OF SiC/BN LAMINATED CERAMICS

Computer simulation of R-curve behaviour in ZrO2-Y2O3 ceramics

Fracture Toughness Evaluation and Plastic Behavior Law of a Single Crystal Silicon Carbide by Nanoindentation

R-CURVE BEHAVIOR AND THERMAL SHOCK RESISTANCE FOR Al2O3 CERAMIC MATRIX COMPOSITES

Weibull modulus of fracture strength of toughened ceramics subjected to small-scale contacts

R-curve behavior of Si3N4 whisker-reinforced Si3N4 matrix composites

R-Curve Determination of 3Y-Psz by the Indentation Strength-In-Bending Method

The Effects of β-Si&lt;sub&gt;3&lt;/sub&gt;N&lt;sub&gt;4&lt;/sub&gt; Whisker Content and Orientation on R-Curve Behaviors of Si&lt;sub&gt;3&lt;/sub&gt;N&lt;sub&gt;4&lt;/sub&gt; Ceramics

The Effects of β-Si<sub>3</sub>N<sub>4</sub> Whisker Content and Orientation on R-Curve Behaviors of Si<sub>3</sub>N<sub>4</sub> Ceramics

Statistical properties of indentation toughness for silicon nitride ceramic

Crack propagation in silicon nitride ceramics under various temperatures and grain boundary toughness

On the Local Crack Resistance of Al2O3–TiC Composites Evaluated by Direct Indentation Method

The Effects of β-Si<sub>3</sub>N<sub>4</sub> Whisker Content and Orientation on R-Curve Behaviors of Si<sub>3</sub>N<sub>4</sub> Ceramics