Abstract:High quality silicon nitride ceramics have shown some advantages for rolling element bearing applications. In particular hybrid bearings (silicon nitride rolling elements and steel races) have the ability to withstand high loads, severe environments and high speeds. However, the difficulties of both sintering and machining the material may result in surfacedefects,such as surface ring cracks. It is difficult to detect surface ring cracks during high volume production processes and hence it is crucially important to understand their influence and the fundamental mechanism of the failures they cause. The purpose of this study is to examine the contact fatigue failure modes of silicon nitride rolling elements with surface ring crack defects. In this study, new experimental and computational techniques are developed to measure and model the interaction of the surface with pre-existing crack defects. A rolling contact fatigue test method is devised for positioning the ring crack in the contact path. Rolling contact fatigue tests are conducted using a modified four-ball machine in a hybrid ceramic/steel combination. A three-dimensional boundary element model is used to determine the stress intensity factors and to carry out the crack face contact analysis. Research shows that the RCF life performance of silicon nitride bearing elements is dependent upon the crack location and fatigue spall happens only at a few crack orientations. The spalling fatigue failure is not only influenced by the original ring crack propagation but also strongly influenced by the subsequent crack face contact. Secondary surface cracks play an important role in the forination of a fatigue spall. The crack gap and crack face friction coefficients significantly affect the formation of secondary surface cracks. Numerical calculation results are consistent with the experimental observations. A quantitative three-dimensional boundary element model has been developed, which can be used to determine the geometry of acceptable surfacering cracks.

R-curve Behavior of Indentation Cracks in Silicon Nitride Based Ceramic Composite

Characterization of R-curve Behavior in Si3N4-based Ceramics

Crack-Location-Dependent R-Curve Behavior in Si3n4

Strength/Crack-Size Relationship for Knoop-Indented Bending Specimens and Its Application to Silicon Nitride Ceramics

Study on the Model of Surface Crack Depth in Ceramics Grinding

Statistical properties of indentation toughness for silicon nitride ceramic

Fracture Toughness Evaluation and Plastic Behavior Law of a Single Crystal Silicon Carbide by Nanoindentation

R-curve Behavior of Laminated SiC/BN Ceramics

Fracture from Knoop Indentation-Induced Flaws in Sintered Silicon Carbide and Hot-Pressed Silicon Nitride

Indentation deformation and microcracking in β-Si 3N 4-based nanoceramic

On the Local Crack Resistance of Al2O3–TiC Composites Evaluated by Direct Indentation Method

DAMAGE RESISTANCE OF SiC/BN LAMINATED CERAMICS

R-curve Behavior of Laminated ZrB2–SiC Ceramic with Strong Interfaces

Microstructure and Crack Resistance Behaviour of Silicon Nitride Ceramics

R-curve behavior of Si3N4 whisker-reinforced Si3N4 matrix composites

Variation in the indentation toughness of silicon nitride

Micromechanical characterization of zirconia and silicon nitride ceramics using indentation and scratch methods

Hertzian Indentation Damage Behavior of Highly Porous Silicon Nitrides

Failure Modes of Silicon Nitride Rolling Elements with Ring Crack Defects

R-curve Behavior, Mechanical Properties and Microstructure of Sintered ZrB2–SiCp–ZrO2f Ceramics

R-Curve Behavior of Machinable Sic/H-Bn Nano-Composites