Abstract:Nanoindentation-based fracture toughness measurements of ceramic materials like silicon carbide (SiC) with pyramidal indenters are of significant interest in materials research. A majority of currently used fracture toughness models have been developed for Vickers indenters and are limited to specific crack geometries. The validity of the indentation-cracking method for the fracture toughness measurement of single crystal SiC, the elastic-plastic anisotropy and orientation dependence around the c-axis when indented in the direction is examined using nanoindentation with different pyramidal indenters. The residual impressions are analyzed using scanning electron microscopy to measure the crack lengths and the validity of existing fracture toughness measurement methods and equations is analyzed. A combination of nanoindentation with different pyramidal indenters to produce a wide range of effective strains and finite element simulation is used to extract flow properties of single crystal SiC in the direction. It is observed that there is no orientation dependence around the c-axis when SiC-6H is indented in the direction with a Berkovich indenter, i.e., it is transversely isotropic. It is also found that for a Berkovich indenter, the Jang and Pharr model, which is based on the Lawn model for cone/halfpenny cracks, gives approximately constant values at low loads ( 1 N), the Laugier model gives constant fracture toughness values. Finite element analysis using equivalent cones is used along with measured hardness values to estimate the yield strength, the work hardening exponents and the stress–strain curve for single crystal SiC-6H in the direction.

Strength/Crack-Size Relationship for Knoop-Indented Bending Specimens and Its Application to Silicon Nitride Ceramics

Fracture from Knoop Indentation-Induced Flaws in Sintered Silicon Carbide and Hot-Pressed Silicon Nitride

R-curve Behavior of Indentation Cracks in Silicon Nitride Based Ceramic Composite

Statistical properties of indentation toughness for silicon nitride ceramic

Variation in the indentation toughness of silicon nitride

Fracture Toughness Evaluation and Plastic Behavior Law of a Single Crystal Silicon Carbide by Nanoindentation

Characterization of R-curve Behavior in Si3N4-based Ceramics

Crack Bridging in Silicon Nitride Ceramics at Various Temperatures and Grain Boundary Toughness

Crack propagation in silicon nitride ceramics under various temperatures and grain boundary toughness

Crack-Location-Dependent R-Curve Behavior in Si3n4

Micromechanical characterization of zirconia and silicon nitride ceramics using indentation and scratch methods

Mechanical strength of nitrogen-doped silicon single crystal investigated by three-point bending method

Analysis of Crack Propagation in Nuclear Graphite Using Three-Point Bending of Sandwiched Specimens

Eliciting stable nanoscale fracture in single-crystal silicon

A MECHANICS ANALYSIS OF STRENGTHENING-TOUGHENING DESIGN OF MULTILAYER STRUCTURE CERAMICS

Depth-sensing ductile and brittle deformation in 3C-SiC under Berkovich nanoindentation

On the Fracture Toughness Measurement of Thin Film Coated Silicon Wafers

Mechanism of crack evolution in nano-indentation of single crystal silicon by atomistic simulations and theoretical analysis

Bending Strength Recovery and Crack Healing Behavior of Al2O3/SiC Nanocomposites at Different Annealing Temperatures

Indentation deformation and microcracking in β-Si 3N 4-based nanoceramic

Assessing fracture toughness in sintered Al2O3–ZrO2(3Y)–SiC ceramic composites through indentation technique