Abstract:The solute segregation and redistribution during non-equilibrium rapid solidification using laser additive manufacturing (LAM) process directly influence the microstructure morphology and phase distribution, which in turn affects their mechanical properties. In this work, a laser micro-alloying strategy was utilized to preserve the original solidification microstructure in the considered Ti-9Mo, Ti-9Cr, Ti-9Fe, and Ti-9Ni (wt%) alloys. The addition of different β-stabilizing elements (Mo, Cr, Fe, and Ni) resulted in distinct microstructures: Ti-9Mo and Ti-9Cr alloys exhibited larger grains (∼502 μm and ∼733 μm) and cellular morphologies due to minimum constitutional undercooling at the solid-liquid interface. Because of the increased constitutional undercooling, the Ti-9Fe grains are significantly refined (∼398 μm), showing a dendritic morphology with elongated primary dendrite arms. Ti-9Ni exhibited the highest constitutional undercooling, forming equiaxed dendrites. However, due to the significant consumption of solute atoms by the interdendritic eutectic phase Ti 2 Ni, the grains did not further refine (∼396 μm). Combined with the temperature field simulation, the solidification conditions of the alloys were determined. In addition, based on the solute partitioning coefficients ( k ), the different solute redistribution and diffusion behaviors at the solid-liquid interface during the laser micro-alloying process of Ti-9Mo with k > 1 and Ti-9Cr with k < 1 were elucidated, providing essential insights into the formation of typical cellular morphology and enhanced Mo enrichment phenomenon in the Ti-9Mo alloy.

Microstructure Evolution in Laser Solid Forming of Ti–50wt% Ni Alloy

Investigation on the Microstructure and Mechanical Behaviors of a Laser Formed Nb-Ti-Al Alloy

Microstructural evolution of a graded nickel-titanium alloy in laser solid forming

MICROSTRUCTURE AND MECHANICAL PROPERTY OF Ti-80%Ni ALLOY PREPARED BY LASER SOLID FORMING

DENDRITE STRUCTURE EVOLUTION IN Ti-20%Ni ALLOY PREPARED BY LASER SOLID FORMING

Study on Phase Transformation and Electrochemical Corrosion of TiNi Alloy Formed by Laser Solid Forming

Microstructure evolution of Ti2AlNb-based alloy by laser solid forming

Influence of Γ/γ′ Morphology Evolution on the Mechanical Properties of Ni-based Single Crystal Superalloys Formed by Laser Metal Deposition

Solidification Morphology Analysis Of Tungsten Alloy By Laser Solid Forming With Multi-Channel Powder Feeding

Microstructure Evolution of Ni-Sn Eutectic Alloy in Laser Cladding

Microstructure and deformation behavior of Ti-6Al-4V alloy by high-power laser solid forming

Microstructure Evolution of Ti_2AlNb-based Alloy by Laser Solid Forming

Microstructure and Phase Structure of Laser Solid Forming Ti_2AlNb-Based Alloy

Competition Growth of Α and Β Phases in Ti-50 At.%al Peritectic Alloy During the Rapid Solidification by Laser Melting Technique

Research on Microstructure and Properties of Ti-6Al-4V Alloys by High Power Laser Solid Forming

Microstructure Evolution of Laser Solid Forming of Ti-Al-V Ternary System Alloys from Blended Elemental Powders

Phase Evolution in Laser Solid Formed Compositionally Graded Ti60-Ti2AlNb Alloys

Microstructure and Mechanical Properties of Laser Melting Deposited Ti_2Ni_3Si/NiTi Laves Alloys

Understanding the solute segregation and redistribution behavior in rapidly solidified binary Ti- X alloys fabricated through non-equilibrium laser processing

Microstructure Evolution of Intermetallics Produced by Laser Powder Deposition

Formation Mechanism of Inherent Spatial Heterogeneity of Microstructure and Mechanical Properties of NiTi SMA Prepared by Laser Directed Energy Deposition