Abstract:W-Ni alloy has been an important engineering material in military, nuclear industry and many other fields because of its excellent properties such as high strength and superior heat/corrosion/oxidation resistances. As a mainstream additive manufacturing technology based on powder-bed-fusion principle, selective laser melting (SLM) is suitable for the rapid fabrication of very complex W-Ni alloy components. However, researches on the powder densification behavior and microstructure formation mechanism of SLM W-Ni alloy are not thorough enough. In this work, a series of W-xNi (x = 16, 23, 30 wt.%) binary alloy samples were fabricated by SLM, using W/Ni mixed powders as the raw materials. The densification behaviors of the W/Ni mixed powders and the microstructure formation mechanisms of the different SLM W-Ni samples were studied. The results showed that when the W/Ni mixed powder bed was scanned by the laser, Ni powders with a relatively lower melting point would melt completely whereas W powders with a relatively higher melting point would rearrange themselves in the liquid Ni and only part of them could be dissolved into the liquid Ni. As the initial content of Ni powders increased, the rearrangement and dissolution of W powders proceed more sufficiently, thus leading to the improvement in densification degree. The relative densities of the W-16Ni, W-23Ni and W-30Ni SLM samples are 92.87 ± 0.67%, 98.66 ± 0.26% and 99.67 ± 0.18%, respectively. During the solidification processes of W-Ni molten pools, the precipitation of W grains from liquid Ni, the transformation of liquid Ni to γ-Ni solid solution and the precipitation of Ni2W from γ-Ni solid solution would occur in sequence. For the W-16Ni and W-23Ni samples, the grain morphology of the W precipitations is dendritic. For the W-30Ni samples, the W precipitations are globular. As a result of the unique melting- solidification behaviors, all the SLM samples possessed a tri-modal microstructure composed of unmelted W particles, dendritic/globular W grains, and γ-Ni solid solution with Ni2W intragranular precipitation. The average microhardness of the SLM W-Ni alloy samples decreased with the increase of Ni content, which could be explained by the variation in defect and microstructure features.

Solidification Morphology Analysis Of Tungsten Alloy By Laser Solid Forming With Multi-Channel Powder Feeding

Investigation on the Microstructure and Mechanical Behaviors of a Laser Formed Nb-Ti-Al Alloy

Microstructure Evolution in Laser Solid Forming of Ti–50wt% Ni Alloy

Powder densification behavior and microstructure formation mechanism of W-Ni alloy processed by selective laser melting

Directional Solidification Microstructure Control Of Nial-1.5at%W Eutectic Alloy And Morphology Of W Meso-Nanowires

Study on Phase Transformation and Electrochemical Corrosion of TiNi Alloy Formed by Laser Solid Forming

Influence of Γ/γ′ Morphology Evolution on the Mechanical Properties of Ni-based Single Crystal Superalloys Formed by Laser Metal Deposition

Densification, microstructural evolutions of 90W-7Ni-3Fe tungsten heavy alloys during laser melting deposition process

Alloying Effects on the Microstructure and Properties of Laser Additively Manufactured Tungsten Materials

Selective Laser Melting of W-Ni-Cu Composite Powder: Densification, Microstructure Evolution and Nano-Crystalline Formation

MICROSTRUCTURE AND MECHANICAL PROPERTY OF Ti-80%Ni ALLOY PREPARED BY LASER SOLID FORMING

Laser powder bed fusion of a novel nano-modified tungsten alloy with refined microstructure and enhanced strength

Effects of laser printing parameters on molten pool formation, microstructure evolution and mechanical properties of laser directed energy deposition of difficult-to-process tungsten heavy-alloy

A Cellular Automaton Simulation of W–Ni Alloy Solidification in Laser Solid Forming Process

Microstructure and Phase Structure of Laser Solid Forming Ti_2AlNb-Based Alloy

Research on Process and Microstructure Formation of W-Ni-Fe Alloy Fabricated by Selective Laser Melting

Microstructure and Mechanical Properties of Additive Manufactured W-Ni-Fe-Co Composite Produced by Selective Laser Melting

Revealing the Solidification Microstructure Evolution and Strengthening Mechanisms of Additive-Manufactured W-FeCrCoNi Alloy: Experiment and Simulation

Laser powder bed fusion of a tungsten-nickel-ferrum alloy via in-situ alloying: Densification, microstructure, and mechanical properties

Influence of Ni content on microstructure of W–Ni alloy produced by selective laser melting

Microstructural Evolvement and Formation of Selective Laser Melting W–Ni–Cu Composite Powder