Abstract:To improve the accuracy and response time of closed-loop control of laser solid forming (LSF) process, it is important to master the effects of processing parameters on the deposition dimensions and mechanical parameters. In this paper, the influences of processing parameters, such as laser power, traverse speed, laser spot diameter, powder feeding rate, shielding gas flow rate on the deposition dimension parameters were investigated. It is found that the deposition height is mainly affected by the mass input of molten pool, namely, powder feeding rate and traverse velocity, especially the powder feeding rate. And the deposition width is mainly affected by the energy input such as, spot diameter, traverse speed and the energy density, among which the spot diameter and traverse speed are of greater influence. A series of transfer functions were built to quantitatively correlate the dependence of deposition layer dimension parameters on the processing parameters. The transfer function model shows a good agreement with the experimental results.To improve the accuracy and response time of closed-loop control of laser solid forming (LSF) process, it is important to master the effects of processing parameters on the deposition dimensions and mechanical parameters. In this paper, the influences of processing parameters, such as laser power, traverse speed, laser spot diameter, powder feeding rate, shielding gas flow rate on the deposition dimension parameters were investigated. It is found that the deposition height is mainly affected by the mass input of molten pool, namely, powder feeding rate and traverse velocity, especially the powder feeding rate. And the deposition width is mainly affected by the energy input such as, spot diameter, traverse speed and the energy density, among which the spot diameter and traverse speed are of greater influence. A series of transfer functions were built to quantitatively correlate the dependence of deposition layer dimension parameters on the processing parameters. The transfer function model shows a good agr...

Study on Carrier Gas Flow Rate on Forming Quality of Thin Wall Parts in Laser Metal Direct Manufacturing

Influence of environmental constraints and carrier gas velocity on powder concentration and temperature distribution during laser inside additive manufacturing process

Laser Direct Forming of Metal Components: Technical Characterizations

Flow field analysis for multilaser powder bed fusion and the influence of gas flow distribution on parts quality

Research on the Forming Process of Three-Dimensional Metal Parts Fabricated by Laser Direct Metal Forming

Influence of Laser Different Waveform on Accuracy of Metal Direct Forming

Self-Regulation-Effect in Laser Direct Metal Manufacturing

Model of layer thickness of thin-walled parts in laser metal direct manufacturing

Influence of Process Parameters on Self-Healing Ability in Laser Metal Direct Forming

Preliminary Studies on Strain Rate Dependence of Laser Shock Forming

The Influence of Standoff Variations on the Forming Accuracy in Laser Direct Metal Deposition

Investigation on Forming Process and Product Properties of Laser Wire-Feed Additive Manufacturing for High-Quality Metal Thin-Walled Parts

Surface Quality and Forming Characteristics of Thin-Wall Aluminium Alloy Parts Manufactured by Laser Assisted MIG Arc Additive Manufacturing

The Influences of Processing Parameters on Forming Characterizations During Laser Rapid Forming

Densification Behavior of Gas and Water Atomized 316l Stainless Steel Powder During Selective Laser Melting

Influence of Powder Flow on Sidewall Quality of Solid Parts in Laser Metal Direct Forming

The Influence of Laser and Powder Defocusing Characteristics on the Surface Quality in Laser Direct Metal Deposition

Numerical Simulation of Powder Flow Field on Coaxial Powder Nozzle in Laser Metal Direct Manufacturing

Processing Parameters Study of Closed-Loop Laser Solid Forming

Influence of Laser Waveform Features on Accuracy of Direct Metal Forming

Modeling of Temperature Field Evolution During Multilayered Direct Laser Metal Deposition