Abstract:PurposeThe purpose of this paper is to investigate the influencing rule of the standoff distance variations between the nozzle outlet and the powder deposition point on forming dimensional accuracy.Design/methodology/approachThe thin‐wall parts were built with three different standoff distances: 1 mm more than the powder focus length, equal to the powder focus length and 1 mm less than the powder focus length. Based on the experimental results, the steady standoff distance can be acquired and the difference between the building height and the ideal height of thin‐wall parts can be compensated automatically in several layers by theoretical calculation.FindingsThe experimental results show that the top surface unevenness of thin‐wall parts can be compensated automatically on the consequent successive layers when the standoff distance is less than the powder focal length from the nozzle outlet to the powder focal point, and the poorer results are obtained when the standoff distance is equal to or more than the powder focal length in the deposition of stainless steel 316L under open‐loop control.Practical implicationsThe shape of parts affects the self‐regulation effect in practical applications, so the self‐regulation effect is useful when the single contour of parts is continuous straight faces and the surface of parts is perpendicular to the build platform, and will be useless for parts with holes.Originality/valueAccording to the requirements under different process conditions in practical applications, one should first find out the relationship between the standoff distance and the building height of single‐trace cladding layer, and then use regression algorithm to obtain the stable standoff distance by simple theoretical calculation. The uniform building height, layer thickness and smooth surface can be obtained at the stable standoff distance under open‐loop control.

Model of layer thickness of thin-walled parts in laser metal direct manufacturing

Self-Regulation-Effect in Laser Direct Metal Manufacturing

Surface Evenness Control of Laser Solid Formed Thin-Walled Parts Based on the Mathematical Model of the Single Cladding Layer Thickness

Method to select defocused amount and Z-increments in forming thin-walled part with laser cladding

Prediction and Verification of the Single Cladding Layer Thickness for Laser Solid Forming

Study on Carrier Gas Flow Rate on Forming Quality of Thin Wall Parts in Laser Metal Direct Manufacturing

The Influence of Laser and Powder Defocusing Characteristics on the Surface Quality in Laser Direct Metal Deposition

Process analysis for laser solid forming of thin-wall structure

Numerical Simulation of Thermal Behavior During Laser Direct Metal Deposition

The Influence of Standoff Variations on the Forming Accuracy in Laser Direct Metal Deposition

Analytical Modeling and Experimental Investigation of Laser Clad Geometry

Adjustment of Accumulation Process for Thin-wall Part by Laser Cladding Rapid Forming

Investigation on layer variation behavior and process stability during direct laser deposition using a semi-theoretic analysis model

Remanufacturing oriented multilayer cladding morphology prediction using a new second order fitting method

Laser cladding forming of inclined thin-walled parts

Thin Wall Formed by Multi-Layer Overlapping Laser Cladding Forming

Analytical modelling of full single-track profile in wire-fed laser cladding

Numerical and Experimental Study on the Profile of Metal Alloys Formed on the Inclined Substrate by Laser Cladding

Laser Cladding Path Planning for Curved Metal Parts

Research on the predictive geometric characteristics model of laser cladding layer

Laser Direct Forming of Metal Components: Technical Characterizations