Abstract:The effect of grain size heterogeneity on the mechanical and microcracking behavior of Lac du Bonnet (LdB) granite during heating, cooling, and uniaxial compression loading is investigated using a grain-based model. By defining a grain size heterogeneity index H , the heterogeneity induced by variation of grain size distribution can be explicitly incorporated into the grain-based model quantitatively. Five modelled LdB granite samples with different grain size heterogeneity indices ranging 0.19–1.22 are established. The results suggest that the grain size heterogeneity and treatment temperature have critical impacts on the mechanical properties of modelled LdB granite samples. With the increase of temperature and grain size heterogeneity index, the mechanical properties show a decreasing trend. Several empirical formulations are developed to predict the temperature-dependent mechanical properties of modelled LdB granite samples with different grain size heterogeneity indices. Generally, modelled LdB granite samples with greater grain size heterogeneity index has a lower temperature of brittle-ductile transition. In terms of microcracking behavior, both temperature and grain size heterogeneity affect it, including number, density, orientation, and distribution. As the temperature increases, the number and related density of thermal stress-induced cracks increase. Generally, the amount of thermal stress in modelled LdB granite samples during heating increases with the increases of grain size heterogeneity index. The controlling factor of the failure pattern of samples gradually changes from the presence of thermal stress-induced cracks to grain size heterogeneity as the model progresses from relatively homogeneous ( H ranging 0.19–0.76) to heterogeneous ( H ranging 0.93–1.22).

Effect of Microcracking on the Energy-Balance Relationship for Hardness Testing of Ceramics

Analysis of the Indentation Size Effect on the Apparent Hardness for Ceramics

Examination of the Indentation Size Effect in Low-Load Vickers Hardness Testing of Ceramics

An energy-balance analysis for the size effect in low-load hardness testing

Fatigue hardening/softening behaviour investigated through Vickers microhardness measurement during high-cycle fatigue

Approach to investigate pre-nucleation fatigue damage of cyclically loaded metals using Vickers microhardness tests

The influence of crack forms on indentation hardness test results for ceramic materials

The Effect of Indenter Angle on the Microindentation Hardness

Effect of porosity on the microhardness testing of brittle ceramics: A case study on the system of NiO-ZrO2

On the description of indentation size effect in hardness testing for ceramics: Analysis of the nanoindentation data

Analysis of Load-Displacement Curves of Ceramics Measured with Low-Load Vickers Hardness Test: Indentation Size Effect

Micro Indentation Fracture of Cement Paste Assessed by Energy-Based Method: the Method Improvement and Affecting Factors

Microhardness, Indentation Size Effect and Real Hardness of Plastically Deformed Austenitic Hadfield Steel

On The Efficiency Of The "Effective Truncation Length" Of Indenter Tip In Mechanical Property Determination With Nanoindentation Tests

The Effect of Grain Size Heterogeneity on Mechanical and Microcracking Behavior of Pre-heated Lac Du Bonnet Granite Using a Grain-Based Model

Micromechanical characterization of zirconia and silicon nitride ceramics using indentation and scratch methods

Load Dependence of Low-Load Knoop Hardness in Ceramics: a Modified PSR Model

Crystal plasticity assessment of the effect of material parameters on contact depth during spherical indentation

Effect of Load-Dependence of Hardness on Indentation Toughness Determination for Soda-Lime Glass

Microhardness indentation size effect in flux-grown crystals of rare earth aluminates

Microhardness Variation with Indentation Depth for Body-Centered Cubic Steels Pertinent to Grain Size and Ferrite Content