Abstract:High temperature is an important factor affecting the mechanical properties and crack propagation behavior of granite. In this study, the mechanical properties and thermal damage mechanism of granite after high temperature are studied experimentally. Subsequently, based on the content and distribution of granite minerals, combined with computed tomography (CT) technique and grain-based model (GBM) modeling method, a novel discrete element numerical model considering real mineral distribution is introduced, and the rationality of the method is verified by experiments. On this basis, the mechanical behavior, crack propagation behavior and failure mode of granite after high temperature are studied. The results show that 450 °C is the thermal damage threshold of granite in this study. When T ≤ 450 °C, the development of thermally-induced microcracks is not significant, the P-wave velocity of granite decreases slightly, and the change of mechanical properties is not obvious. When T > 450 °C, the thermally-induced microcrack propagates rapidly, the fracture network and fracture zone are formed locally in the specimen, and the P-wave velocity and mechanical properties of granite deteriorate significantly. The simulation results show that the number of thermally-induced microcracks in granite specimens is positively correlated with temperature, and the tensile cracks are mainly at the mineral boundary, and the thermal stress concentration between mineral particles is the main cause of thermally-induced microcracks. After temperature treatment, there are mainly tensile cracks in granite specimens under uniaxial compression, and the orientation of tensile cracks tends to be isotropic with the increase of temperature. When T < 600 °C, the crack distribution and failure mode of granite specimens under uniaxial compression are consistent with those at room temperature. When T ≥ 600 °C, thermally-induced microcracks begin to dominate the uniaxial compression failure process, and granite specimens begin to show ductile failure characteristics, and the brittle-plastic transition was observed between 600 °C and 750 °C.

The Effect of Grain Size Heterogeneity on Mechanical and Microcracking Behavior of Pre-heated Lac Du Bonnet Granite Using a Grain-Based Model

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

The Influence of Mechanical Heterogeneity of Grain Boundary on Mechanical and Microcracking Behavior of Granite Under Mode I Loading Using a Grain-Based Model

Mechanical behaviour of Lac du Bonnet granite after high-temperature treatment using bonded-particle model and moment tensor

Grain Size Heterogeneity Controls Strengthening to Weakening of Granite over High-Temperature Treatment

Modeling Crack Propagation in Heterogeneous Granite Using Grain-Based Phase Field Method

Modeling damage evolution in granite under temperature using a thermo-mechanical grain-based FDEM model

Modeling Damage Evolution in Heterogeneous Granite Using Digital Image-Based Grain-Based Model

Grain-based Coupled Thermo-Mechanical Modeling for Stressed Heterogeneous Granite under Thermal Shock

Mechanical Properties and Crack Propagation Behavior of Granite After High Temperature Treatment Based on a Thermo-Mechanical Grain-Based Model

Numerical Investigation on Determining the Optimal Heterogeneity Index and Compressive–tensile Ratio of Granite Using a Damage-Based Numerical Manifold Method

Experimental and numerical investigation on meso -fracture behavior of Beishan granite subjected to grain size heterogeneity

Mechanical behavior of granite subjected to thermal treatment: insight from experiment and numerical simulation

Study on the Effect of Micro-Geometric Heterogeneity on Mechanical Properties of Brittle Rock Using a Grain-Based Discrete Element Method Coupling with the Cohesive Zone Model

Evolutionary Analysis of Heterogeneous Granite Microcracks Based on Digital Image Processing in Grain-Block Model

Quantitative analysis of grain size effect on tensile mechanical behavior of granite based on multi-level force chain networks

Thermal Influence on Mechanical Properties of Granite: A Microcracking Perspective

Role of Loading Rate on Cracking Behavior in Granite Disks With Laboratory Experiments and Grain‐Based Modeling

Laboratory Investigation on Physical and Mechanical Behaviors of Granite after Heating and Different Cooling Rates

Numerical investigation of the effects of the micro-parameters of the transgranular contact on the mechanical response of granite

Effect of Thermal Treatment on the Mode I Fracture Toughness of Granite under Dynamic and Static Coupling Load