Abstract:An Eibenstock granite (EG) thin section blank was used to observe thermal-induced cracks after subjecting it to a heating–cooling cycle to 1000 °C. To understand the real-time thermal cracking behavior during the heating and cooling processes, a grain-based discrete element thermo-mechanical coupled model duplicating the mineral morphological characteristics of EG was developed based on the digital image processing (DIP) technique. During heating, nearly all microcracks were initiated below 600 °C and only a small number of new microcracks were induced at higher temperatures. Low-temperature microcracks were mostly widened after the quartz-phase transitions (especially the first one). This indicates that the α–β quartz transitions at 573 °C and the 2nd quartz transition at 870 °C are dominant factors in the widening microcracks rather than in creating new cracks under heating loads. During the cooling process, some cracks were newly generated but less significant than the expansion and contraction of the widths of pre-existing, which represent the most significant microstructural changes caused by the mineral grain cooling and contraction. The microcracking behavior is mainly related to the accumulated tensile stresses around the mineral grains with smaller thermal expansion coefficients (e.g., feldspar). Once the local stress exceeds the microcontact strength inducing new microcracks, a contact strength-stress equilibrium will be reached. New microcracks are not likely to form, since the established equilibrium is hard to be violated during slow temperature change. Moreover, significant mineral grain deformations can affect the motions of the neighboring mineral grain segments with broken microcontacts. As a result, crack widening and contraction are mainly due to mineral deformations and mechanical interactions at the grain size level. The proposed numerical model emerges as a powerful tool to investigate the actual real-time thermal cracking mechanism of granite. It also indicates that the finding on thermal cracking during laboratory tests using microscopic techniques at room temperature is a superposition of heating and cooling effects.

Mechanical behaviour of Lac du Bonnet granite after high-temperature treatment using bonded-particle model and moment tensor

Mechanical behavior of granite subjected to thermal treatment: insight from experiment and numerical simulation

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

The Effect of Grain Size Heterogeneity on Mechanical and Microcracking Behavior of Pre-heated Lac Du Bonnet Granite Using a Grain-Based Model

Thermal Influence on Mechanical Properties of Granite: A Microcracking Perspective

Mechanical Properties and Crack Propagation Behavior of Granite After High Temperature Treatment Based on a Thermo-Mechanical Grain-Based Model

Experimental and numerical simulation study on the evolution of mechanical properties of granite after thermal treatment

Microcracking behavior and damage mechanism of granite subjected to high temperature based on CT-GBM numerical simulation

Temperature driven real-time weakening and strengthening mechanisms of unconfined granite

Thermo-mechanical Coupling Characteristics of Granite under Triaxial Pressures and Ultrahigh Heating Rates

Experiment and numerical simulation study of dynamic mechanical behavior of granite specimen after high temperature treatment

Experimental investigation on the mechanical properties of thermally damaged granite specimens containing pre‐existing holes

Laboratory Investigation on Physical and Mechanical Behaviors of Granite after Heating and Different Cooling Rates

Analysis of physical and mechanical behaviors and microscopic mineral characteristics of thermally damaged granite

Experimental investigation on the macro- and micromechanical properties of water-cooled granite at different high temperatures

Mechanical Behaviors of Granite After Thermal Treatment Under Loading and Unloading Conditions

Experimental investigation on physical and tensile mechanical properties of granite after different heating/cooling treatments

Experimental Investigation of Physical and Tensile Mechanical Properties of Granite after Different Heating and Cooling Treatments

Cracking process and microstructural characteristics of granite under heating–cooling alternations

Thermal Cracking in Granite During a Heating–Cooling Cycle up to 1000 °C: Laboratory Testing and Real-Time Simulation

Experimental investigation on mechanical behaviors of Nanan granite after thermal treatment under conventional triaxial compression