Abstract:Investigating the coupling effects of temperature levels and number of heating-water cooling cycles on thermal damage, cracking failure mechanisms, and mechanical responses of HDR (hot dry rock) is a vital issue during the exploitation of geothermal energy. In this study, a large number of granite samples exposed to high temperature treatment (25, 150, 300, 450, 600 °C) with multiple heating and water cooling cycles (1, 5, 10, 15) were carried out micro observations of X-ray diffraction (XRD) and scanning electron microscopy (SEM), and uniaxial compression tests with acoustic emission (AE) signals monitoring. The results show that, as the temperature level or number of heating and water cooling cycles increases, uniaxial compressive strength, elastic modulus, crack damage stress, and the damage index all present a reduction, while the peak axial strain, dilatancy volumetric strain and Poisson’s ratio increase. A genetic algorithm is established to evaluate the coupling influences of temperature and number of heating-water cooling cycles on the uniaxial compressive strength and dilatancy volumetric strain. The AE activities tend to be active due to crack initiation, development and coalescence. For a large temperature level or number of cycles, the AE signals remain active during the whole deformation process, while increase rate of the accumulated AE counts with time gradually slows down. The granites undergo a typical splitting failure mode, characterized by several tensile cracking planes at a low temperature or number of cycles, but present complicated crack networks of a turtle shape with increasing temperature or number of cycles, resulting in a larger fractal dimension of the induced surface cracks. The failure mechanism of rock gradually transfers from brittleness-dominated to ductility-dominated due to accumulated thermal damage. Then, the micro thermal damage mechanism of uncompressed granites is analyzed through microscopic observations of XRD and SEM. A power function is proposed to describe the relations between longitudinal wave velocity and uniaxial compressive strength. With increasing temperature or number of cycles, the maximum diffraction intensity of quartz decreases by 25.82%–38.89% and 13.42%–31.93%, respectively, and the micro thermal defects gradually develop, resulting in weakened macro bearing capacity.Article highlightsHeating and water cooling cycles effects on mechanical properties of granites.Heating and water cooling cycles effects on micro thermal damage and failure mechanisms of granites.Micro mechanisms for the macro strength responses.

Cracking process and microstructural characteristics of granite under heating–cooling alternations

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

The role of multiple heating and water cooling cycles on physical and mechanical responses of granite rocks

Mechanical and damage evolution characteristics of granite after heating-cooling cycles

Experimental and Numerical Investigation on Thermal Damage of Granite Subjected to Heating and Cooling

Experimental Study on Fracture Properties of Heat-Treated Granite in I-Ii Mixed Mode Suffered from Water and Liquid Nitrogen Cooling Methods

Experimental study on failure and fracturing attributes of granite after thermal treatments with different cooling conditions

Experimental study on the physical and mechanical variations of hot granite under different cooling treatments

Investigation on physico-mechanical properties and microstructural evolution patterns of heated granite after liquid nitrogen cooling

Laboratory Investigation on Physical and Mechanical Behaviors of Granite after Heating and Different Cooling Rates

Mechanical Properties and Crack Propagation Behavior of Granite After High Temperature Treatment Based on a Thermo-Mechanical Grain-Based Model

Experimental Study on the Damage and Failure Characteristics of High-Temperature Granite after Liquid-Nitrogen Cooling

Mechanical behavior of granite subjected to thermal treatment: insight from experiment and numerical simulation

Experimental study of the influence of temperature and cooling method on dynamic mechanical properties and damage of granite

Structural Properties and Failure Characteristics of Granite after Thermal Treatment and Water Cooling

Experimental Investigation of Physical and Tensile Mechanical Properties of Granite after Different Heating and Cooling Treatments

Experimental investigation on the mechanical properties of thermally damaged granite specimens containing pre‐existing holes

Experimental investigation on physical and tensile mechanical properties of granite after different heating/cooling treatments

Experimental and numerical simulation study on the evolution of mechanical properties of granite after thermal treatment

Experiment and numerical simulation study of dynamic mechanical behavior of granite specimen after high temperature treatment

Experimental Study on the Damage of Granite by Acoustic Emission after Cyclic Heating and Cooling with Circulating Water