Abstract:Investigating the coupling effects of temperature levels and number of heating-water cooling cycles on thermal damage, cracking failure mechanisms, and mechanical responses of HDR (hot dry rock) is a vital issue during the exploitation of geothermal energy. In this study, a large number of granite samples exposed to high temperature treatment (25, 150, 300, 450, 600 °C) with multiple heating and water cooling cycles (1, 5, 10, 15) were carried out micro observations of X-ray diffraction (XRD) and scanning electron microscopy (SEM), and uniaxial compression tests with acoustic emission (AE) signals monitoring. The results show that, as the temperature level or number of heating and water cooling cycles increases, uniaxial compressive strength, elastic modulus, crack damage stress, and the damage index all present a reduction, while the peak axial strain, dilatancy volumetric strain and Poisson’s ratio increase. A genetic algorithm is established to evaluate the coupling influences of temperature and number of heating-water cooling cycles on the uniaxial compressive strength and dilatancy volumetric strain. The AE activities tend to be active due to crack initiation, development and coalescence. For a large temperature level or number of cycles, the AE signals remain active during the whole deformation process, while increase rate of the accumulated AE counts with time gradually slows down. The granites undergo a typical splitting failure mode, characterized by several tensile cracking planes at a low temperature or number of cycles, but present complicated crack networks of a turtle shape with increasing temperature or number of cycles, resulting in a larger fractal dimension of the induced surface cracks. The failure mechanism of rock gradually transfers from brittleness-dominated to ductility-dominated due to accumulated thermal damage. Then, the micro thermal damage mechanism of uncompressed granites is analyzed through microscopic observations of XRD and SEM. A power function is proposed to describe the relations between longitudinal wave velocity and uniaxial compressive strength. With increasing temperature or number of cycles, the maximum diffraction intensity of quartz decreases by 25.82%–38.89% and 13.42%–31.93%, respectively, and the micro thermal defects gradually develop, resulting in weakened macro bearing capacity.Article highlightsHeating and water cooling cycles effects on mechanical properties of granites.Heating and water cooling cycles effects on micro thermal damage and failure mechanisms of granites.Micro mechanisms for the macro strength responses.

Mechanical and damage evolution characteristics of granite after heating-cooling cycles

Tensile Properties and Damage Evolution Laws of Granite After High- and Low-Temperature Cycles

Damage evolution and acoustic emission characteristics of hard rock under high temperature thermal cycles

Mechanical test of granite with multiple water–thermal cycles

Experimental Study on the Influence of Real-Time Temperature Cycling on Physical and Mechanical Properties of Granite

Cracking process and microstructural characteristics of granite under heating–cooling alternations

The role of multiple heating and water cooling cycles on physical and mechanical responses of granite rocks

Experimental Investigation of Physical and Tensile Mechanical Properties of Granite after Different Heating and Cooling Treatments

Thermal Acoustic Emission Characteristics and Damage Evolution of Granite under Cyclic Thermal Shock

Study on the Evolution of Physical Parameters and Dynamic Compression Mechanical Properties of Granite after Different Heating and Cooling Cycles

Experimental investigation on physical and tensile mechanical properties of granite after different heating/cooling treatments

Thermal Damage and Acoustic Emission Characteristics of Granite Based on Brazilian Splitting Test

Preparing rock samples using high temperature heating damage method and its application

Damage Characteristics of Granite Under Hydraulic and Cyclic Loading–Unloading Coupling Condition

Mechanical properties and acoustic emission characteristics of mixed granite after different numbers of freeze‒thaw cycles

Effects of temperature and increasing amplitude cyclic loading on the mechanical properties and energy characteristics of granite

Mechanical characteristics and damage evolution of granite under freeze–thaw cycles

Effect of heating–water cooling cycle treatment on the pore structure and shear fracture characteristics of granite

Experimental Study on the Damage and Failure Characteristics of High-Temperature Granite after Liquid-Nitrogen Cooling

Physical-mechanical properties and thermal-induced damage of granite after high-temperature pretreatment

Experimental investigation on damage characteristics and fracture behaviors of granite after high temperature exposure under different strain rates