Abstract:Investigating the coupling effects of temperature levels and number of heating-water cooling cycles on thermal damage, cracking failure mechanisms, and mechanical responses of HDR (hot dry rock) is a vital issue during the exploitation of geothermal energy. In this study, a large number of granite samples exposed to high temperature treatment (25, 150, 300, 450, 600 °C) with multiple heating and water cooling cycles (1, 5, 10, 15) were carried out micro observations of X-ray diffraction (XRD) and scanning electron microscopy (SEM), and uniaxial compression tests with acoustic emission (AE) signals monitoring. The results show that, as the temperature level or number of heating and water cooling cycles increases, uniaxial compressive strength, elastic modulus, crack damage stress, and the damage index all present a reduction, while the peak axial strain, dilatancy volumetric strain and Poisson’s ratio increase. A genetic algorithm is established to evaluate the coupling influences of temperature and number of heating-water cooling cycles on the uniaxial compressive strength and dilatancy volumetric strain. The AE activities tend to be active due to crack initiation, development and coalescence. For a large temperature level or number of cycles, the AE signals remain active during the whole deformation process, while increase rate of the accumulated AE counts with time gradually slows down. The granites undergo a typical splitting failure mode, characterized by several tensile cracking planes at a low temperature or number of cycles, but present complicated crack networks of a turtle shape with increasing temperature or number of cycles, resulting in a larger fractal dimension of the induced surface cracks. The failure mechanism of rock gradually transfers from brittleness-dominated to ductility-dominated due to accumulated thermal damage. Then, the micro thermal damage mechanism of uncompressed granites is analyzed through microscopic observations of XRD and SEM. A power function is proposed to describe the relations between longitudinal wave velocity and uniaxial compressive strength. With increasing temperature or number of cycles, the maximum diffraction intensity of quartz decreases by 25.82%–38.89% and 13.42%–31.93%, respectively, and the micro thermal defects gradually develop, resulting in weakened macro bearing capacity.Article highlightsHeating and water cooling cycles effects on mechanical properties of granites.Heating and water cooling cycles effects on micro thermal damage and failure mechanisms of granites.Micro mechanisms for the macro strength responses.

Effects of temperature and increasing amplitude cyclic loading on the mechanical properties and energy characteristics of granite

Damage evolution and acoustic emission characteristics of hard rock under high temperature thermal cycles

Evolution of mechanical properties and microstructure in thermally treated granite subjected to cyclic loading

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

Study on the Evolution of Physical Parameters and Dynamic Compression Mechanical Properties of Granite after Different Heating and Cooling Cycles

Experimental Study on the Influence of Real-Time Temperature Cycling on Physical and Mechanical Properties of Granite

Mechanical and damage evolution characteristics of granite after heating-cooling cycles

Effect of Cyclic Impact on the Dynamic Behavior of Thermally Shocked Granite

Tensile Properties and Damage Evolution Laws of Granite After High- and Low-Temperature Cycles

Effect of high temperature on the brittleness index of granite: an experimental investigation

The role of multiple heating and water cooling cycles on physical and mechanical responses of granite rocks

Analysis of physical and mechanical properties of granite under different cooling methods under high-temperatures thermal cycles

Mechanical test of granite with multiple water–thermal cycles

Experimental investigation on damage characteristics and fracture behaviors of granite after high temperature exposure under different strain rates

Mechanical properties of granite at high temperature subjected to true triaxial compression

Mechanical Behaviors of Granite After Thermal Treatment Under Loading and Unloading Conditions

Energy Storage Characteristics and Damage Constitutive Model of Thermally Treated Granite: an Experimental Investigation

Experimental investigation on physical and mechanical properties of thermal cycling granite by water cooling

Dynamic mechanical behavior and energy dissipation characteristics of low-temperature saturated granite under cyclic impact loading

Experimental Investigation of Physical and Tensile Mechanical Properties of Granite after Different Heating and Cooling Treatments

Damage Characteristics of Granite Under Hydraulic and Cyclic Loading–Unloading Coupling Condition