Abstract:Rock mass engineering in a high-temperature environment is often affected by complex stress conditions. In this paper, to reveal the damage characteristics and fracture behaviors of granite after high temperature exposure under different strain rates, twenty-four uniaxial compression tests were carried out on granite specimens under the combined action of six temperatures (25 °C, 200 °C, 400 °C, 600 °C, 800 °C, and 1000°C) and four quasi-static strain rates (1×10-5 s-1, 1×10-4 s-1, 1×10-3 s-1, and 1×10-2 s-1). The variations in the density, P-wave velocity, strength, deformation, elastic modulus, fractal fragmentation, acoustic emission characteristics, three-dimensional location, and thermal-force coupled damage characteristics were investigated. Through regression analysis and the corresponding formulae, the sensitivity of granite specimens to mechanical responses under different strain rates and temperatures was further discussed. The experimental results indicated that the mechanical responses of granite specimens are temperature and strain rate dependent. Under the influence of thermal-force coupling, the mechanical behaviors of granite specimens present substantial differences due to initial thermal damage and mechanical damage. Research results can provide the basis for stability evaluation and problem solving related to high-temperature rock engineering under complex stress environments.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the damage characteristics and fracture behavior of granite under high - temperature environments and different strain rates. Specifically, the research aims to reveal the changes in the mechanical responses of granite after high - temperature treatment under different strain - rate conditions, including changes in density, P - wave velocity, strength, deformation, elastic modulus, fractal fragmentation, acoustic emission characteristics, three - dimensional positioning, and thermo - mechanical coupling damage characteristics. Through regression analysis and related formulas, the influence of different temperatures and strain rates on the mechanical - response sensitivity of granite samples is further discussed. The research background lies in that in geotechnical engineering applications in high - temperature environments (such as underground coal gasification, nuclear waste disposal, geothermal resource development, and deep underground space utilization), the thermo - mechanical behavior of rocks is crucial for stability. In these applications, rocks usually encounter different temperature conditions, and underground rock structures are inevitably disturbed by static and dynamic compressive loads, resulting in different strain rates in the instability processes of surrounding rocks. Therefore, studying the mechanical behavior of rocks under different temperature and strain - rate conditions has important practical significance for reasonable design and favorable construction. The research methods include using a hydraulic servo - testing system to conduct uniaxial compression tests on granite samples after high - temperature treatment, and examining the performance changes of samples under different temperatures (25°C, 200°C, 400°C, 600°C, 800°C, and 1000°C) and four quasi - static strain rates (1×10^-5 s^-1, 1×10^-4 s^-1, 1×10^-3 s^-1, and 1×10^-2 s^-1). Through the experimental results, the concepts of fractal dimension and damage - change rate are introduced, and through regression analysis and corresponding formulas, the mechanical - behavior sensitivity of samples under different strain rates and temperatures is discussed.

Experimental investigation on damage characteristics and fracture behaviors of granite after high temperature exposure under different strain rates

Uniaxial Compressive Behavior of Granite at High Strain Rates

Preparing rock samples using high temperature heating damage method and its application

Experiment and numerical simulation study of dynamic mechanical behavior of granite specimen after high temperature treatment

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

Experimental study of the influence of temperature and cooling method on dynamic mechanical properties and damage of granite

Experimental investigation on the mechanical properties of thermally damaged granite specimens containing pre‐existing holes

Experimental investigation on the macro- and micromechanical properties of water-cooled granite at different high temperatures

Experimental Study on Damage and Fracture Characteristics of Beishan Granite Subjected to High-temperature Treatment with DIC and AE Techniques

Mechanical properties of granite at high temperature subjected to true triaxial compression

Mechanical Properties and Crack Propagation Behavior of Granite After High Temperature Treatment Based on a Thermo-Mechanical Grain-Based Model

Investigation of the fracture characteristics of granite and green sandstone under different thermal treatments

Mechanical behavior of granite subjected to thermal treatment: insight from experiment and numerical simulation

Experimental and numerical simulation study on the evolution of mechanical properties of granite after thermal treatment

Experimental investigation on mechanical behaviors of Nanan granite after thermal treatment under conventional triaxial compression

Physical-mechanical properties and thermal-induced damage of granite after high-temperature pretreatment

Experimental investigation on physical and tensile mechanical properties of granite after different heating/cooling treatments

Laboratory Investigation on Physical and Mechanical Behaviors of Granite after Heating and Different Cooling Rates

Experimental Investigation of Physical and Tensile Mechanical Properties of Granite after Different Heating and Cooling Treatments

Experimental investigation on the effect of open fire on the tensile properties and damage evolution behavior of granite

Investigations of the Progressive Damage and Failure Behaviors of Thermally Treated Granite Under the Coupling Action of Biaxial Stress Constraint and High Strain Rate