Abstract:Investigating the coupling effects of temperature levels and number of heating-water cooling cycles on thermal damage, cracking failure mechanisms, and mechanical responses of HDR (hot dry rock) is a vital issue during the exploitation of geothermal energy. In this study, a large number of granite samples exposed to high temperature treatment (25, 150, 300, 450, 600 °C) with multiple heating and water cooling cycles (1, 5, 10, 15) were carried out micro observations of X-ray diffraction (XRD) and scanning electron microscopy (SEM), and uniaxial compression tests with acoustic emission (AE) signals monitoring. The results show that, as the temperature level or number of heating and water cooling cycles increases, uniaxial compressive strength, elastic modulus, crack damage stress, and the damage index all present a reduction, while the peak axial strain, dilatancy volumetric strain and Poisson’s ratio increase. A genetic algorithm is established to evaluate the coupling influences of temperature and number of heating-water cooling cycles on the uniaxial compressive strength and dilatancy volumetric strain. The AE activities tend to be active due to crack initiation, development and coalescence. For a large temperature level or number of cycles, the AE signals remain active during the whole deformation process, while increase rate of the accumulated AE counts with time gradually slows down. The granites undergo a typical splitting failure mode, characterized by several tensile cracking planes at a low temperature or number of cycles, but present complicated crack networks of a turtle shape with increasing temperature or number of cycles, resulting in a larger fractal dimension of the induced surface cracks. The failure mechanism of rock gradually transfers from brittleness-dominated to ductility-dominated due to accumulated thermal damage. Then, the micro thermal damage mechanism of uncompressed granites is analyzed through microscopic observations of XRD and SEM. A power function is proposed to describe the relations between longitudinal wave velocity and uniaxial compressive strength. With increasing temperature or number of cycles, the maximum diffraction intensity of quartz decreases by 25.82%–38.89% and 13.42%–31.93%, respectively, and the micro thermal defects gradually develop, resulting in weakened macro bearing capacity.Article highlightsHeating and water cooling cycles effects on mechanical properties of granites.Heating and water cooling cycles effects on micro thermal damage and failure mechanisms of granites.Micro mechanisms for the macro strength responses.

Effect of Cyclic Impact on the Dynamic Behavior of Thermally Shocked Granite

Uniaxial Compressive Behavior of Granite at High Strain Rates

Experiment and numerical simulation study of dynamic mechanical behavior of granite specimen after high temperature treatment

Mechanical test of granite with multiple water–thermal cycles

Investigations of the Progressive Damage and Failure Behaviors of Thermally Treated Granite Under the Coupling Action of Biaxial Stress Constraint and High Strain Rate

Effects of temperature and increasing amplitude cyclic loading on the mechanical properties and energy characteristics of granite

An investigation on the deterioration of physical and mechanical properties of granite after cyclic thermal shock

Dynamic Behaviour and Energy Evolution of Granite in a Tunnel Under Cyclic Impact Loading

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

Experimental study of the influence of temperature and cooling method on dynamic mechanical properties and damage of granite

Dynamic mechanical behavior and energy dissipation characteristics of low-temperature saturated granite under cyclic impact loading

Dynamic response and fracture characteristics of thermally-treated granite under dynamic loading

Study on the Evolution of Physical Parameters and Dynamic Compression Mechanical Properties of Granite after Different Heating and Cooling Cycles

Fractal Characteristics and Energy Dissipation of Granite After High-Temperature Treatment Based on SHPB Experiment

Multiscale damage and thermal-stress evolution characteristics of rocks with thermal storage potential under thermal shocks

Damage evolution and acoustic emission characteristics of hard rock under high temperature thermal cycles

The role of multiple heating and water cooling cycles on physical and mechanical responses of granite rocks

Tensile Properties and Damage Evolution Laws of Granite After High- and Low-Temperature Cycles

Evolution of mechanical properties and microstructure in thermally treated granite subjected to cyclic loading

Mechanical behavior of granite subjected to thermal treatment: insight from experiment and numerical simulation

Experimental Study on the Influence of Real-Time Temperature Cycling on Physical and Mechanical Properties of Granite