Abstract:Investigating the coupling effects of temperature levels and number of heating-water cooling cycles on thermal damage, cracking failure mechanisms, and mechanical responses of HDR (hot dry rock) is a vital issue during the exploitation of geothermal energy. In this study, a large number of granite samples exposed to high temperature treatment (25, 150, 300, 450, 600 °C) with multiple heating and water cooling cycles (1, 5, 10, 15) were carried out micro observations of X-ray diffraction (XRD) and scanning electron microscopy (SEM), and uniaxial compression tests with acoustic emission (AE) signals monitoring. The results show that, as the temperature level or number of heating and water cooling cycles increases, uniaxial compressive strength, elastic modulus, crack damage stress, and the damage index all present a reduction, while the peak axial strain, dilatancy volumetric strain and Poisson’s ratio increase. A genetic algorithm is established to evaluate the coupling influences of temperature and number of heating-water cooling cycles on the uniaxial compressive strength and dilatancy volumetric strain. The AE activities tend to be active due to crack initiation, development and coalescence. For a large temperature level or number of cycles, the AE signals remain active during the whole deformation process, while increase rate of the accumulated AE counts with time gradually slows down. The granites undergo a typical splitting failure mode, characterized by several tensile cracking planes at a low temperature or number of cycles, but present complicated crack networks of a turtle shape with increasing temperature or number of cycles, resulting in a larger fractal dimension of the induced surface cracks. The failure mechanism of rock gradually transfers from brittleness-dominated to ductility-dominated due to accumulated thermal damage. Then, the micro thermal damage mechanism of uncompressed granites is analyzed through microscopic observations of XRD and SEM. A power function is proposed to describe the relations between longitudinal wave velocity and uniaxial compressive strength. With increasing temperature or number of cycles, the maximum diffraction intensity of quartz decreases by 25.82%–38.89% and 13.42%–31.93%, respectively, and the micro thermal defects gradually develop, resulting in weakened macro bearing capacity.Article highlightsHeating and water cooling cycles effects on mechanical properties of granites.Heating and water cooling cycles effects on micro thermal damage and failure mechanisms of granites.Micro mechanisms for the macro strength responses.

Thermal Cracking in Granite During a Heating–Cooling Cycle up to 1000 °C: Laboratory Testing and Real-Time Simulation

Influence of repeated heating on physical-mechanical properties and damage evolution of granite

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

Thermal Influence on Mechanical Properties of Granite: A Microcracking Perspective

Microcracking behavior and damage mechanism of granite subjected to high temperature based on CT-GBM numerical simulation

Mechanical Properties and Crack Propagation Behavior of Granite After High Temperature Treatment Based on a Thermo-Mechanical Grain-Based Model

Experimental and numerical simulation study on the evolution of mechanical properties of granite after thermal treatment

Thermo-mechanical Coupling Characteristics of Granite under Triaxial Pressures and Ultrahigh Heating Rates

Real-Time Measurement of Mechanical Behavior of Granite During Heating–Cooling Cycle: A Mineralogical Perspective

Cracking process and microstructural characteristics of granite under heating–cooling alternations

Mechanical behaviour of Lac du Bonnet granite after high-temperature treatment using bonded-particle model and moment tensor

Thermal Damage Evolution of Granite under Different Thermal Conditions Based on Two-Scale Tessellation Via Discrete Element Method

Mechanical behavior of granite subjected to thermal treatment: insight from experiment and numerical simulation

The role of multiple heating and water cooling cycles on physical and mechanical responses of granite rocks

Laboratory Investigation on Physical and Mechanical Behaviors of Granite after Heating and Different Cooling Rates

Thermal damage pattern and thresholds of granite

Analysis of physical and mechanical behaviors and microscopic mineral characteristics of thermally damaged granite

Temperature driven real-time weakening and strengthening mechanisms of unconfined granite

Multiscale damage and thermal-stress evolution characteristics of rocks with thermal storage potential under thermal shocks

Mechanical Behaviors of Granite After Thermal Treatment Under Loading and Unloading Conditions

An investigation on the deterioration of physical and mechanical properties of granite after cyclic thermal shock