Abstract:Investigating the coupling effects of temperature levels and number of heating-water cooling cycles on thermal damage, cracking failure mechanisms, and mechanical responses of HDR (hot dry rock) is a vital issue during the exploitation of geothermal energy. In this study, a large number of granite samples exposed to high temperature treatment (25, 150, 300, 450, 600 °C) with multiple heating and water cooling cycles (1, 5, 10, 15) were carried out micro observations of X-ray diffraction (XRD) and scanning electron microscopy (SEM), and uniaxial compression tests with acoustic emission (AE) signals monitoring. The results show that, as the temperature level or number of heating and water cooling cycles increases, uniaxial compressive strength, elastic modulus, crack damage stress, and the damage index all present a reduction, while the peak axial strain, dilatancy volumetric strain and Poisson’s ratio increase. A genetic algorithm is established to evaluate the coupling influences of temperature and number of heating-water cooling cycles on the uniaxial compressive strength and dilatancy volumetric strain. The AE activities tend to be active due to crack initiation, development and coalescence. For a large temperature level or number of cycles, the AE signals remain active during the whole deformation process, while increase rate of the accumulated AE counts with time gradually slows down. The granites undergo a typical splitting failure mode, characterized by several tensile cracking planes at a low temperature or number of cycles, but present complicated crack networks of a turtle shape with increasing temperature or number of cycles, resulting in a larger fractal dimension of the induced surface cracks. The failure mechanism of rock gradually transfers from brittleness-dominated to ductility-dominated due to accumulated thermal damage. Then, the micro thermal damage mechanism of uncompressed granites is analyzed through microscopic observations of XRD and SEM. A power function is proposed to describe the relations between longitudinal wave velocity and uniaxial compressive strength. With increasing temperature or number of cycles, the maximum diffraction intensity of quartz decreases by 25.82%–38.89% and 13.42%–31.93%, respectively, and the micro thermal defects gradually develop, resulting in weakened macro bearing capacity.Article highlightsHeating and water cooling cycles effects on mechanical properties of granites.Heating and water cooling cycles effects on micro thermal damage and failure mechanisms of granites.Micro mechanisms for the macro strength responses.

Thermal damage pattern and thresholds of granite

Variation of mechanical properties of granite after high-temperature treatment

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

Mechanical Properties and Crack Propagation Behavior of Granite After High Temperature Treatment Based on a Thermo-Mechanical Grain-Based Model

Physical-mechanical properties and thermal-induced damage of granite after high-temperature pretreatment

Analysis of physical and mechanical behaviors and microscopic mineral characteristics of thermally damaged granite

Laboratory Investigation on Physical and Mechanical Properties of Granite After Heating and Water-Cooling Treatment

Experimental and numerical simulation study on the evolution of mechanical properties of granite after thermal treatment

Porosity and wave velocity evolution of granite after high-temperature treatment: a review

Influence of repeated heating on physical-mechanical properties and damage evolution of granite

Microcracking behavior and damage mechanism of granite subjected to high temperature based on CT-GBM numerical simulation

Thermal Damage and Acoustic Emission Characteristics of Granite Based on Brazilian Splitting Test

Experimental investigation on the macro- and micromechanical properties of water-cooled granite at different high temperatures

Thermal Effects on Failure Characteristics of Granite with Pre-Existing Fissures

Structural Properties and Failure Characteristics of Granite after Thermal Treatment and Water Cooling

The role of multiple heating and water cooling cycles on physical and mechanical responses of granite rocks

Thermal damage effect on the thermal conductivity inhomogeneity of granite

Variation on Thermal Damage Rate of Granite Specimen with Thermal Cycle Treatment

Experimental Study on Damage and Fracture Characteristics of Beishan Granite Subjected to High-temperature Treatment with DIC and AE Techniques

Damage evolution and acoustic emission characteristics of hard rock under high temperature thermal cycles

Effects of Heating on Some Physical Properties of Granite, Shandong, China