Abstract:Ni-based single crystal line alloy is constituted with gamma phase and gamma' phase in the form of coherency. Since an indenter for two-phase coherent structure is bigger than the usual nano-scale indenter, the press location of indenter may be unclear in nanoindentation simulation. Both gamma phase and gamma' phase may be pressed initially, and the mechanical properties shown are different because of the initial press locations. The nanoindentation of Ni-based single crystal line alloys is simulated by molecular dynamics method. Two models are used to study about the hardness in [001] crystal orientation, one is the model gamma/gamma' with the initial indentation on gamma phase, and the other is the model gamma'/gamma with the initial indentation on gamma' phase. The influence of misfit dislocation at (001) interface on nanoindentation of the two models is analyzed using a center-symmetry parameter. Results show that the misfit dislocation shape of the two models are different after relaxation. Lomer-Cottrell dislocation occurs on (001) interface in the gamma'/gamma model. Before 0.930 nm press depth is reached, there is little change in the (001) interface misfit dislocation of the two models. Relationship between press load and press depth is similar for the two models, and it is the same in the relationship between hardness and press depth. After press depth reaches 0.930 nm, the misfit dislocation at (001) interface for model gamma'/gamma grows big, which results in a smaller press load and a smaller hardness computation in the model gamma'/gamma than that in model gamma/gamma'. When the press depth reach 2.055 nm, we find only a small amount of dislocations in gamma phase that can go into gamma' phase since the misfit dislocation at (001) interface in model gamma/gamma' hinders the process. However, none of dislocations can go into gamma phase because of the prevention caused by Lomer-Cottrell dislocation at the (001) interface in the model gamma'/gamma. That means the Lomer-Cottrell dislocation reinforces the material obviously. So the press load in model gamma'/gamma grows faster than that in model gamma/gamma'.

The Effect of Indenter Angle on the Microindentation Hardness

The indenter tip radius effect in micro- and nanoindentation hardness experiments.

Indenter Tip Radius Effect on the Nix–Gao Relation in Micro- and Nanoindentation Hardness Experiments

The Influence of Indenter Tip Radius on the Micro-Indentation Hardness

Friction Effect on Micro-indentation Measurement with Different Indenters

Indentation Size Effect: A Study Via The Mechanism-Based Strain-Gradient Plasticity Theory

A Numerical Study of Indentation with Small Spherical Indenters

Influence of Friction in Material Characterization in Microindentation Measurement.

Simulation of Indenter Geometry Effects in Nanoindentation

The Correlation Between Indentation Hardness and Material Properties with Considering Size Effect

Influence Of Initial Indentation Point On Nanoindentation Of Ni-Based Single Crystal Line Alloys

The Equivalent Axisymmetric Model for Berkovich Indenters in Power-Law Hardening Materials

Influence of Indenter Tip Roundness on Hardness Behavior in Nanoindentation

A study of microindentation hardness tests by mechanism-based strain gradient plasticity

Influence of Friction on Imperfect Conical Indentation for Elastoplastic Material

The role of rough surface in the size-dependent behavior upon nano-indentation

QUASICONTINUUM ANALYSIS OF INDENTER SIZE EFFECT IN NANOINDENTATION TESTS

Study on Size Effect in Indentation Tests

The Effect of Friction on Indentation Test Results