Abstract:The nanoindentation hardnesses of a commercially available soda-lime glass, a tetragonal ZrO2 polycrystalline and a hot-pressed Si3N4 were measured in the peak load range from 7.5 to 500 mN. The experimental results revealed that, for each material, the measured hardness exhibits a peak-load- dependence, i.e., indentation size effect (ISE). Such a peak-load-dependence was then analyzed using the Meyer’ law, the Hay–Kendall approach, the proportional specimen resistance (PSR) model, the elastic recovery model and the modified PSR model. The analyses revealed that: (1) Meyer's law provides a satisfactory description for the experimental data for each material but cannot provide any knowledge of the origin of the observed ISE; (2) the Hays–Kendall approach, the elastic recovery model and the PSR model yield meaningless values of the parameters included in the corresponding equations, invalidating the applicability of these models in analyzing the ISE in the nanoindentation region; (3) the modified PSR model is sufficient for describing the observed ISE but the physical meaning of this model seems to be more complex than those proposed originally. For each material, the true hardness was also determined based on the PSR model, the elastic recovery model and the modified PSR model, respectively. It was found that the true hardness values deduced based on different models are similar with each other and this similarity was attributed to the similarity between the empirical equations adopted in these models.

Effect of porosity on the microhardness testing of brittle ceramics: A case study on the system of NiO-ZrO2

Effects of porosity and pore size on mechanical and thermal properties as well as thermal shock fracture resistance of porous ZrB2–SiC ceramics

Porosity effect on the functional properties and energy harvesting performance of Ba0.85Ca0.15Ti0.90Zr0.10O3 ceramics

Indentation Size Effect in Vickers Hardness Testing of NiO/8YSZ Composites

Examination of the Indentation Size Effect in Low-Load Vickers Hardness Testing of Ceramics

On the description of indentation size effect in hardness testing for ceramics: Analysis of the nanoindentation data

Nanoindentation Characterization of the Hardness of Zirconia Dental Ceramics

Micromechanical characterization of zirconia and silicon nitride ceramics using indentation and scratch methods

Effect of Porosity on Shear Properties of Sintering Metal Fibre Porous Material

Size Effect on the Punch Performance of Brittle Porous Ceramics: Theoretical Analysis and Numerical Simulation

Effect of Pore Size on Strength and Fracture Toughness of Zirconia Ceramics

Effect of Grain Size on Hardness, Bending Strength and Indentation Toughness of Multi-Doped Zirconia Ceramics

Load Dependence of Low-Load Knoop Hardness in Ceramics: a Modified PSR Model

Effect of Porosity on the Mechanical Properties of Dental Glass Ceramic

Effect of Microcracking on the Energy-Balance Relationship for Hardness Testing of Ceramics

Effect of Indentation Size on Strain Rate Sensitivity of Zirconia Ceramics by Nanoindentation

Hertzian Indentation Damage Behavior of Highly Porous Silicon Nitrides

Quantitative Dependence of the Properties of Pb0.99(Zr0.95Ti0.05)0.98Nb0.02O3 Ferroelectric Ceramics on Porosity

The influence of crack forms on indentation hardness test results for ceramic materials

Effects of a Porous Boron Nitride Nanofiber on Nano-Mechanical Properties in Shallow Surface of WC-Si3N4 Composite

Analysis of Load-Displacement Curves of Ceramics Measured with Low-Load Vickers Hardness Test: Indentation Size Effect