Abstract:Size effect of the nickel-based single crystal superalloy DD6 is investigated in this study by performing nanoindentation experiments and finite element (FE) simulations by emphasizing the strain rate effect. An analytical method is proposed to identify whether a material has the indentation size effect (ISE) based on incremental formulations of the indentation strain rate. By taking ISE as a critical factor, the contact area is further described by considering the curvature radius of non-ideal indenters due to wear issues in practice. In order to emphasize the strain rate effect during indentations, the material parameters dominating mechanical properties are adopted from the strain rate dependent Johnson–Cook model, particular for the nickel-based single crystal superalloy. Consequently, the dimensional ISE analysis is performed by proposing a theoretical framework to establish the relationship among the indentation strain rate, the indenter tip curvature radius and the applied load–penetration depth (P–h) curve for characterizing nanoindentation responses. By identifying the indenter curvature radii and loading time as the important external factors of hardness measurement, FE simulations are validated to achieve good agreement with experimental data. The validated FE predictions are reliably employed to calibrate the dimensionless model of hardness with different indenter curvature radii and loading rates. In the proposed form of the dimensional hardness model, it is found that the indenter curvature radius can be perfectly independent of the material constitutive properties and loading rates. It reveals the potential and advantageous determination of characteristic length of materials by using nanoindentation.

Indentation Size Effect in Vickers Hardness Testing of NiO/8YSZ Composites

Examination of the Indentation Size Effect in Low-Load Vickers Hardness Testing of Ceramics

Effect of porosity on the microhardness testing of brittle ceramics: A case study on the system of NiO-ZrO2

Compositional Dependence of Hardness of (Ce,y)-Tzp/al2o3 Composites

On the description of indentation size effect in hardness testing for ceramics: Analysis of the nanoindentation data

The Effect of Indenter Angle on the Microindentation Hardness

Analysis of Load-Displacement Curves of Ceramics Measured with Low-Load Vickers Hardness Test: Indentation Size Effect

Size effect of nickel-based single crystal superalloy revealed by nanoindentation with low strain rates

Meyer analysis of the indentation size effect in the low-load hardness of (Ce,Y)-TZP/Al2O3 composites

Load-Dependence of the Measured Hardness of Ti(C,N)-Based Cermets

Influence of TiC particle size on the load-independent hardness of Al2O3–TiC composites

Effect of peak load on the determination of hardness and Young's modulus of hot-pressed Si3N4 by nanoindentation

Load Dependence of Low-Load Knoop Hardness in Ceramics: a Modified PSR Model

Indentation size effects in hardness of annealed NiB coatings

Nanoindentation Characterization of the Hardness of Zirconia Dental Ceramics

Nano-Indentation Properties of Tungsten Carbide-Cobalt Composites as a Function of Tungsten Carbide Crystal Orientation

Impact of Micro-Indentation on Hardness and Indentation Depth of Ni-Cr Super Alloys

High Temperature Indentation Tests of YSZ Coatings in Air Up to 1200 °C

Load-dependence of Knoop Hardness of Al2O3–TiC Composites

Load dependence of the apparent hardness of silicon nitride in a wide range of loads

Indentation Depth-Dependence of the Hardness of NiTi Shape Memory Alloy and Al Single Crystal: Phase Transition Versus Plasticity