Abstract:Size effect of the nickel-based single crystal superalloy DD6 is investigated in this study by performing nanoindentation experiments and finite element (FE) simulations by emphasizing the strain rate effect. An analytical method is proposed to identify whether a material has the indentation size effect (ISE) based on incremental formulations of the indentation strain rate. By taking ISE as a critical factor, the contact area is further described by considering the curvature radius of non-ideal indenters due to wear issues in practice. In order to emphasize the strain rate effect during indentations, the material parameters dominating mechanical properties are adopted from the strain rate dependent Johnson–Cook model, particular for the nickel-based single crystal superalloy. Consequently, the dimensional ISE analysis is performed by proposing a theoretical framework to establish the relationship among the indentation strain rate, the indenter tip curvature radius and the applied load–penetration depth (P–h) curve for characterizing nanoindentation responses. By identifying the indenter curvature radii and loading time as the important external factors of hardness measurement, FE simulations are validated to achieve good agreement with experimental data. The validated FE predictions are reliably employed to calibrate the dimensionless model of hardness with different indenter curvature radii and loading rates. In the proposed form of the dimensional hardness model, it is found that the indenter curvature radius can be perfectly independent of the material constitutive properties and loading rates. It reveals the potential and advantageous determination of characteristic length of materials by using nanoindentation.

Microhardness indentation size effect in flux-grown crystals of rare earth aluminates

On the description of indentation size effect in hardness testing for ceramics: Analysis of the nanoindentation data

Examination of the Indentation Size Effect in Low-Load Vickers Hardness Testing of Ceramics

The Effect of Indenter Angle on the Microindentation Hardness

Load Dependence of Low-Load Knoop Hardness in Ceramics: a Modified PSR Model

Effect of Microcracking on the Energy-Balance Relationship for Hardness Testing of Ceramics

Load dependence of the apparent hardness of silicon nitride in a wide range of loads

Indentation Size Effect: a Study Via the Mechanism-based Strain-Gradient Plasticity Theory

Modelling Nano-Indentation of Ion-Irradiated FCC Single Crystals by Strain-Gradient Crystal Plasticity Theory

Recent Efforts in Modelling Combined Rate, Size and Thermal Effects on Single Crystal Strength

Indentation Depth-Dependent Hardness of Metal-Organic Framework Crystals: the Effect of Local Amorphization Induced by Indentation

Microhardness, Indentation Size Effect and Real Hardness of Plastically Deformed Austenitic Hadfield Steel

The indenter tip radius effect in micro- and nanoindentation hardness experiments.

Indentation Size Effect in Vickers Hardness Testing of NiO/8YSZ Composites

Effect of porosity on the microhardness testing of brittle ceramics: A case study on the system of NiO-ZrO2

QUASICONTINUUM ANALYSIS OF INDENTER SIZE EFFECT IN NANOINDENTATION TESTS

Multiscale Simulation of Surface Defects Influence Nanoindentation by a Quasi-Continuum Method

Microhardness Variation with Indentation Depth for Body-Centered Cubic Steels Pertinent to Grain Size and Ferrite Content

The role of rough surface in the size-dependent behavior upon nano-indentation

Size effect of nickel-based single crystal superalloy revealed by nanoindentation with low strain rates