Abstract:Predicting the dramatic changes in material properties caused by irradiation damage is key for the design of future nuclear fission and fusion reactors. Self-ion implantation is an attractive tool for mimicking the effects of neutron irradiation. However, the damaged layer of implanted samples is only few microns thick, making it difficult to estimate macroscopic properties. Here we address this challenge using a combination of experimental and modelling techniques. We concentrate on self-ion-implanted tungsten, the front-runner for fusion armour components and a prototypical bcc material. To capture dose-dependent evolution of properties, we experimentally characterise samples with damage levels from 0.01 to 1 dpa. Spherical nano-indentation of <001> grains shows hardness increasing up to a dose of 0.032 dpa, beyond which it saturates. AFM measurements show pile-up increasing up to the same dose, beyond which large pile-up and slip-steps are seen. Based on the observations we develop a crystal plasticity (CPFE) model for the irradiated material. It captures irradiation-induced hardening followed by strain-softening through interaction of irradiation-defects and gliding dislocations. Shear resistance of irradiation-defects is derived from TEM observations of similarly irradiated samples. Nano-indentation of pristine and implanted tungsten of doses 0.01, 0.1, 0.32 and 1 dpa is simulated. Two model parameters are fitted to the experimental results of the 0.01 dpa sample and are kept unchanged for all other doses. Peak load, indent surface profiles and damage saturation predicted by the CPFE model closely match experimental observations. Predicted lattice distortions and dislocation distributions around indents agree with corresponding measurements from HR-EBSD. Finally, the CPFE model is used to predict the macroscopic stress-strain response of similarly irradiated bulk tungsten material.

Modelling Nano-Indentation of Ion-Irradiated FCC Single Crystals by Strain-Gradient Crystal Plasticity Theory

Study on Irradiation Effect in Stress-Strain Response with CPFEM During Nano-Indentation

Mechanical Properties For Irradiated Face-Centred Cubic Nanocrystalline Metals

Model for the hardness-depth relationships of ion-irradiated nanocrystalline metals

Nanoindentation Test of Ion-Irradiated Materials: Issues, Modeling and Challenges

A Crystal Plasticity Model with Irradiation Effect for the Mechanical Behavior of FCC Metals

Numerical and Experimental Studies of Deep Indentation on Single Crystals

Revealing the Temperature-Dependent Hardening Mechanisms of Non-Uniformly Distributed Defects for Ion-Irradiated Metals: Experiments and Modeling

MACRO- AND MICROSCOPIC APPROACHES TO PLANE STRAIN DEFORMATION STATES OF FACE-CENTERED CUBIC METALS UNDER WEDGE INDENTATION

Modified deformation behaviour of self-ion irradiated tungsten: A combined nano-indentation, HR-EBSD and crystal plasticity study

Indentation Size Effect: a Study Via the Mechanism-based Strain-Gradient Plasticity Theory

A Mechanistic Model for Depth-Dependent Hardness of Ion Irradiated Metals

A Size-Dependent Tensorial Plasticity Model for FCC Single Crystal with Irradiation

Simulation of the Irradiation Effect on Hardness of Chinese HTGR A508-3 Steels with CPFEM

Modelling Irradiation-Induced Softening in BCC Iron by Crystal Plasticity Approach

High Strain Gradient Plasticity Associated with Wedge Indentation into Face-Centered Cubic Single Crystals: Geometrically Necessary Dislocation Densities

A Self-Consistent Plasticity Theory for Modeling the Thermo-Mechanical Properties of Irradiated Fcc Metallic Polycrystals

Irradiation Effect on F321 Austenitic Stainless-Steel: Nanoindentation and Modeling with the Crystal Plasticity Method

Model of Nanoindentation Size Effect Incorporating the Role of Elastic Deformation

Multiscale Crystal Plasticity Finite Element Model for Investigating the Irradiation Hardening and Defect Evolution Mechanism of A508-3 Steel