Abstract:We have previously developed silicon-based light-emitting devices (LEDs) with luminescent erbium (Er)-doped TiO2 (TiO2:Er) films [Yang et al., Appl. Phys. Lett. 100, 031103 (2012)]. In an LED therein, the TiO2:Er film is sandwiched between the ITO film and heavily boron-doped p-type silicon (p+-Si). In this work, we have investigated the electroluminescence (EL) from two LEDs with the TiO2:Er films annealed at 650 and 850 °C, respectively. It is revealed that between the TiO2:Er film and p+-Si, there is an intermediate silicon oxide (SiOx, x ≤ 2) layer and its thickness increases from ∼4 to 8 nm with the increase of annealing temperature from 650 to 850 °C. Interestingly, the thickness of the intermediate SiOx layer is found to exhibit a profound impact on the EL from the LED with the TiO2:Er film on p+-Si. The EL from the LED with the 650 °C-annealed TiO2:Er film is activated only under the forward bias with the positive voltage connecting to the p+-Si substrate. Such EL consists of the oxygen-vacancy-related emissions from TiO2 host and the characteristic visible and ∼1540 nm emissions from the Er3+ ions, while the EL from the LED with the 850 °C-annealed TiO2:Er film can only be enabled by the reverse bias with the negative voltage applied on the p+-Si substrate. Such EL features only the visible and ∼1540 nm emissions from the Er3+ ions. The difference in the EL behaviors of the two LEDs as mentioned above is found to be ascribed to the different electrical conduction mechanisms.

Indium tin oxide thin films for silicon-based electro-luminescence devices prepared by electron beam evaporation method

Preparation and Properties of Indium Tin Oxide Films Deposited by Reactive Evaporation at Different Deposited Rate

Electroluminescence from Silicon-Based Light-Emitting Devices with Erbium-Doped TiO2 Films Annealed at Different Temperatures

Thin Indium-Tin-Oxide Film Produced Through Sol–Gel Method with Its Morphological and Electrical Properties

Electroluminescence From Indium Tin Oxide Film/Nanoscale Si Oxide/P-Si Structure

Preparation and Electrical Properties of Electrospun Tin-Doped Indium Oxide Nanowires

Transparent electric conductive films for optoelectronic devices

Influence of Thermal Annealing on Electrical and Optical Properties of Indium Tin Oxide Thin Films

Annealing effects of In2O3 thin films on electrical properties and application in thin film transistors

Electroluminescence from Sno2/P(+)-Si Heterostructured Light-Emitting Device: Enhancing Its Intensity Via Capping A Tio2 Film

Correlation between microstructure and electrical, optical properties of thermal annealed ITO thin films

Low-plasma and high-temperature PECVD grown silicon-rich SiO(x) film with enhanced carrier tunneling and light emission

Electroluminescence from Metal–oxide–semiconductor Devices Based on Erbium Silicate Nanocrystals and Silicon Nanocrystals Co-Embedded in Silicon Oxide Thin Films

Fabrication and performance of indium oxide based transparent thin film transistors

Near-Ultraviolet And Near-Infrared Electroluminescence From An Indium-Tin-Oxide Film Native Si Oxide/P-Si Structure

Effect of film thickness on the properties of indium tin oxide thin films

In 2 O 3 透明薄膜晶体管的制备及其电学性能的研究

Optimization of electro-luminescence performance of silicon quantum dots based light-emitting-diode

The key of ITO films with high transparency and conductivity: Grain size and surface chemical composition

Characteristics of Indium-Tin-Oxide Nanowiskers Grown by Vapor-Liquid-Solid Growth Method and Electron-Beam Evaporation Technique

Effect of RF Sputtering Power and Deposition Time on Optical and Electrical Properties of Indium Tin Oxide Thin Film