Abstract:Several papers describe the treatment of calcium carbonate (CaCO3) with stearic acid acting as a surface modifier, in order to avoid particle coalescence and, at the same time, enhancing filler hydrophobic properties. However, there is still a lack of data relating the efficiency of a traditional modifier used, stearic acid, in the synthesis of CaCO3 nanofiller with other modifiers in terms of inhibition of the agglomeration process during the synthesis. Thus, the present work evaluates the stability of CaCO3 nanoparticles obtained by a carbonation reaction, considering the contents of the crystallization inhibitor (trisodium phosphate-Na3PO4) and the surface modifier (myristic acid) applied. In order to achieve an efficient carbonation process, a bubbling system was used. The results showed that higher surface modifier and crystallization inhibitor contents lead to a narrower particle size distribution and a lower particle size. Comparing the CaCO3 nanoparticles coated with myristic acid (CaCO3-MA) and with stearic acid (CaCO3-SA), it was observed that CaCO3-MA has a higher thermal stability and a lower particle size in relation to CaCO3-SA. Besides this, a more spherical geometry was achieved for CaCO3-MA nanoparticles due to the bubbling system applied during the carbonation reaction.The present study compare the properties between CaCO3 nanoparticles synthesized with myristic acid (MA) with a commercial CaCO3 grade, modified with stearic acid (SA). The results showed that CaCO3-MA has a higher thermal stability and a lower particle size in relation to CaCO3-SA. Beyond this, shape more spherical was achieved for CaCO3-MA nanoparticles due to the bubbling system used during carbonation reaction.

Mechano-activated Surface Modification of Calcium Carbonate in Wet Stirred Mill and Its Properties

The Mechanical and NIR Studies on Ultrafine Calcium Carbonate Treated by Four Surface Modifiers.

The Study on Mechanism, Interfacial Properties of PS-b-PAA Copolymer Coated Calcium Carbonate Particulate

Mechanism and surface characteristics of polyacrylic acid-coated ultra-fine CaCO3

Wet mechanochemical surface modification of calcite employing an integration of conventional design and analytical hierarchy process

INFLUENCE OF SURFACE-MODIFICATION FOR CALCIUM CARBONATE ON THE INTERACTION BETWEEN THE FILLERS AND POLYDIMETHYLSILOXANE

Preparation and In-Situ Surface Modification of CaCO3 Nanoparticles with Calcium Stearate in a Microreaction System

Surface Energy Study Of Alooh Coated Calcium Carbonate By Inverse Gas Chromatography

Mechanism of surface hydrophobicity modification of wollastonite powder

Effect of Oleic Acid-modified Nano-CaCO3 on the Crystallization Behavior and Mechanical Properties of Polypropylene

Surface Modification of CaCO3 by Ultrasound-Assisted Titanate and Silane Coupling Agents

Effect of Dispersants on the Stability of Calcite in Non-Polar Solutions

Myristic acid as surface modifier of calcium carbonate hydrophobic nanoparticles

Surface modification of calcium carbonate: A review of theories, methods and applications

Surface modification of nanosized biphasic alpha-TCP/HA powders

Formation of calcium carbonate nanoparticles through the assembling effect of glucose and the influence on the properties of PDMS

Thermal Treatment to Improve the Hydrophobicity of Ground CaCO3 Particles Modified with Sodium Stearate

Effects of Surface Modification with Stearic Acid on the Dispersion of Some Inorganic Fillers in PE Matrix

Surface Modification of Nanosized Biphasic α-TCP/HA Powders

Surface Modification of Nano-calcium Carbonate by Composite Modifier

In Situ Preparation of Hydrophobic CaCO3 Nanoparticles in a Gas–liquid Microdispersion Process