Abstract:In this study, the rice husk (RH) of "Joha rice" a unique rice variety of Assam (Northeast India) has been used as raw materials for synthesis of ash and silica powder. The combustion of the husk at 500°C for 1 h followed by further treatment at 800°C for 2 h in muffle furnace produces white rice husk ash (RHA). One part of RHA was kept as untreated, and the another part was acid treated. Silica was extracted from the untreated ash in the form of sodium silicate by treating with 2.5M NaOH at the boiling temperature. Then, silica was precipitated from sodium silicate by slow addition of 2.5M H 2 SO 4 . The broad x‐ray diffraction (XRD) pattern and characteristic peaks at d‐spacing, 8.3792 and 4.1489 with specific 2θ at ∼21.3° reveal the presence of amorphous SiO 2 as major phase in the ash (both acid treated and untreated). The characteristic Fourier transform infrared (FTIR) spectroscopic peaks at 470–450, 801, and 1100 cm −1 for different modes of Si‐O‐Si vibrations also support the presence of silica. The scanning electron micrographs (SEMs) revealed the morphology of the RHA as fine particles undergoing agglomeration probably due to hydrogen bonding between surface silanol groups present. The irregular rough morphology is a characteristic of the amorphous nature of the samples. The energy‐dispersive X‐ray analysis (EDX) showed that RHA composition was dominated by elements Si and O for both untreated and acid‐treated samples. For acid‐treated sample, the amount of Si and O is found to be comparatively higher than the untreated one due to surface cleaning. The point of zero charge (pH PZC ) of the prepared samples was determined by a simple pH metric method. The pH PZC of the untreated RHA was found to be ∼ 9.8 ± 0.2. However, almost similar pH PZC values of the acid‐treated RHA silica and commercial silica (∼6.6 ± 0.2) indicate the effectiveness of acid treatment prior processing.

Silica White Obtained from Rice Husk in a Fluidized Bed

The preparation of silica white from fly ash and its characterization

Preparation of highly dispersed nanosilica from rice husk by aprecipitation method combined with high pressure homogenization

Synthesis, Characterization and Application of Submicron ZrSiO4 Powder Via Sol-Gel-microemulsion-hydrothermal Method

Production of amorphous rice husk ash in a 500kW fluidized bed combustor

Synthesis of White Silica From "Joha Rice Husk" (A Special Rice Variety of Assam, India), Characterization and Determination of Its Point of Zero Charge (pH PZC )

Production and characterization of silica materials from rice husk ash by different combustion processes

Experimental Study on Rice Husk Combustion in a Circulating Fluidized Bed

A Detailed Study of the Effects of Pyrolysis Temperature and Feedstock Particle Size on the Preparation of Nanosilica from Rice Husk

Synthesis of Rice Husk Nanosilica using the Hydrothermal Method

Extraction of Silica from Rice Husk 71

Coproduction of silicon nitride & oxynitride whiskers and precipitated silica from industrial rice husk ash

Hydrodynamic behaviors of an internally circulating fluidized bed with wide-size-distribution particles for preparing polysilicon granules

Improvement of the characteristics of silica particles extracted from rice husks using chemical-physical method

Processing and Characterization of Nano Silica and Iron Oxide Coated Silica Composites Extracted from Rice Hulls

Bed Agglomeration and Straw Ash Behavior During Fluidized Bed Combustion of Rice Straw

Synthesis and Characterization of Si/SiO2/SiC Composites Through Carbothermic Reduction of Rice Husk-based Silica

Kinetic study on the preparation of silica from rice husk under various pretreatments

Effect of temperature on the ability to synthesize SiC from rice husks

Gasification of Rice Husk in A Fluidized-Bed Gasifier Without Inert Additives

Study on combustion characteristics of rice husk-fired fluidized bed boiler