Abstract:The reactive extrusion of maleic anhydride grafted polypropylene (PP-g-MAH) with ethylenediamine (EDA) as coupling agent was carried out in a co-rotating twin-screw extruder to produce long chain branched polypropylene (LCBPP). Part of PP-g-MAH was replaced by maleic anhydride grafted high-density polyethylene (HDPE-g-MAH) or linear low-density polyethylene (LLDPE-g-MAH) to obtain hybrid long chain branched (LCB) polymers. Compared with the linear PP, PE and their blends, the LCB polyolefins exhibit excellent dynamic shear and transient extensional rheological characteristics such as increased dynamic modulus, higher low-frequency complex viscosity, significantly enhanced melt strength and strain-hardening behaviors. LCB polymers also have higher tensile strength, tensile modulus, impact strength and lower elongation at break than linear polymer and their blends. Supercritical carbon dioxide (scCO2) was introduced in the reactive extrusion process. With the presence of scCO 2, the motor current of twin extruder was decreased and LCB polyolefins with lower MFR, higher complex viscosity and increased tensile strength and modulus were obtained. This indicates that the application of scCO2 can reduce the viscosity of melt in extruder, enhance the diffusion of reactive species, facilitate the reaction between functional groups, and increase the LCB density. The foaming behavior of both linear and LCB polyolefins were studied. The results show that cellular materials produced from the LCB polyolefins have higher weight reduction, smaller cell size and better mechanical properties than those produced from the linear polymers.

Preparation of Ultra-High Modulus Polyethylene Films by the Zone-Annealing Method

Preparation of High‐modulus and High‐strength Poly(ethylene Terephthalate) Film by Zone‐annealing Method

Combined Processing of Polypropylene Film by Coextrusion and Zone‐annealing

Preparation of High-Modulus and High-Strength Poly(Ethylene-Terephthalate) Fiber by Zone Annealing

Preparation of High Modulus and High Strength Fiber by Zone-annealing Method

Preparation of High-Modulus Nylon-6 Fibre by an Improved Zone-Annealing Method

The Microstructure-Tensile Property Relationship of Polyethylene Resin for Biaxially Stretched Film

PREPARATION OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE USING STRUCTURED NANOPARTICAL ZIEGLER-NATTA CATALYSTS

Mechanical Properties and Structure of Poly(p-phenylenevinylene) Films Prepared by the Zone-Reaction Method

Structure Evolution and Properties Enhancement of Polyamide‐6/polyamide‐1010 Films under Uniaxial and Biaxial Stretching

Studies on Nonisothermal Crystallization of Ultra–high Molecular Weight Polyethylene in Liquid Paraffin

Application of Annealing under Extremely High Tension to Nylon 6 Fibers.

Anisotropy of Dynamic Viscoelasticity for Uniaxially Drawn Poly(Ethylene-Terephthalate) Films and Its Temperature-Dependence

Preparation of High-Modulus Poly(ethylene Terephthalate) Fibers by Vibrating Hot Drawing

Microstructure and Mechanical Properties of Hot-Air Drawn Poly(ethylene-2,6-naphthalate) Fibers

Application of a High-Tension Annealing Method to Nylon 66 Fibres

Segmental Orientations and Deformation Mechanism of Poly(Ether-Block-Amide) Films

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

In Situ Determination of Mechanical Properties for Poly(Ether Ether Ketone) Film under Extreme Conditions

Synthesis of Ultra-High-Molecular-Weight Polyethylene with an Elevated Melting Point in an Octafluorobutane Medium

Development of Oriented Morphology and Mechanical Properties upon Drawing of Stereo-Complex of Poly(L-lactic acid) and Poly(D-lactic acid) by Solid-State Coextrusion