Abstract:In this study, a new strategy to produce less entangled ultrahigh-molecular-weight polyethylene (UHMWPE) was proposed based on the exploitation of a nano-dispersed MgO/MgCl2/TiCl4 core–shell catalyst. Due to its poreless nature and the full dispersion of a single primary particle, the polymer chains grown from the catalyst surface can immediately crystallize without the disturbance of other polymer chains confined in pores. The melting characteristics of annealed polymer, the rheological properties, and the solid-state drawability of synthesized polymer clarified that the nano-dispersed catalysts enabled the production of less entangled UHMWPE even under an industrial condition. Featured with a tunable active-site density through the control of chlorination and the selection of a co-catalyst, more weakly entangled UHMWPE can be obtained at a reasonable activity.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.iecr.0c05432?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.iecr.0c05432</a>.C 1s XPS spectra of catalysts prepared at different chlorination times; FTIR spectra of the catalyst referenced to polyoxyethylene alkylamine, pristine MgO, and organically modified MgO; normalized elastic modulus, Gt′/Gmax′, where Gmax′ was taken from the modulus at t = 3 h; and polymerization performance of PA-Cat-0.5 at different polymerization temperatures (<a class="ext-link" href="/doi/suppl/10.1021/acs.iecr.0c05432/suppl_file/ie0c05432_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

PREPARATION OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE USING STRUCTURED NANOPARTICAL ZIEGLER-NATTA CATALYSTS

ETHYLENE POLYMERIZATION WITH CORE-SHELL ZIEGLER-NATTA HYBRID CATALYSTS

Preparation of Polyethylene Elastomers with Increased High Molecular Weight and Nearly Perfect Strain Recovery by Steric Control of Asymmetric Α-Diimine Nickel Catalyst

Advanced Catalyst Technology for Broad/Bimodal Polyethylene, Achieved by Polymer-Coated Particles Supporting Hybrid Catalyst

EFFECT OF ORGANIC PART OF ORGANIC/INORGANIC HYBRID SUPPORT IMMOBILIZED HYBRID CATALYST ON ETHYLENE POLYMERIZATION

Preparation of Polypropylene/MMT Nanocomposites Using Complex Supported Catalysts

Ethylene Polymerization with Palygorskite Supported Nickel-Diimine Catalyst

PREPARATION OF NOVEL POLYETHYLENE-graft-POLY(4-VINYLPYRIDINE)-SUPPORTED METALLOCENE CATALYSTS FOR ETHYLENE POLYMERIZATION

Preparation of Weakly Entangled and Fine-sized Ultra-High-Molecular Weight Polyethylene by a MgCl2-Based Ziegler–Natta Catalyst

Nano-Dispersed Ziegler-Natta Catalysts for 1 μm-Sized Ultra-High Molecular Weight Polyethylene Particles

Preparation and Characterization of Novel Polyethylene Supported Metallocene Catalysts

Reduced Entanglement Density of Ultrahigh-Molecular-Weight Polyethylene Favored by the Isolated Immobilization on the MgCl2 (110) Plane

Ethylene polymerization using a novel MgCl2/SiO2-supported Ziegler–Natta catalyst

Particle Morphology and Morphogenesis of Nascent Polyethylene Produced with a Spherical MgCl2‐supported Ziegler–Natta Catalyst in Slurry Process

Less Entangled Ultrahigh-Molecular-Weight Polyethylene Produced by Nano-Dispersed Ziegler–Natta Catalyst

Synthesis of highly spherical Ziegler–Natta catalyst by employing Span 80 as an emulsifier suitable for UHMWPE production

High temperature polymerization of propylene catalyzed by MgCl2-supported Ziegler–Natta catalyst with various cocatalysts

Immobilization of a Zirconium Complex Bearing Bis(phenoxyketimine) Ligand on MCM-41 for Ethylene Polymerization

Suppressing the Entanglements of Ultrahigh-Molecular-Weight Polyethylene Via Controlling the Adhesion Effect in a POSS-Modified Support

Synthesis of polyethylene with broad molecular weight distribution by Ziegler-Natta catalysts supported on doped MgCl2

Study of the effect of the nature of catalyst systems on the molecular structure and properties of ultra-high molecular weight polyethylene