Abstract:Palygorskite clay supported Cp2TiCl2 catalyst system was developed and evaluated by ethylene slurry polymerization.The inorganic carrier was thermally activated at 500℃ to generate surface Lewis acidity,which was confirmed by pyridine adsorption experiment and subsequent FTIR spectra analysis.Two types of supported catalysts were prepared:immobilizing the metallocene catalyst directly on the carrier(Cat-A)and also on the carrier with methylaluminoxane(MAO)modification(Cat-B).Polymerization was carried out in toluene at 40℃ and 60℃ with the supported Cp2TiCl2 catalyst and homogeneous analogue.Cat-A gave higher catalyst activity compared with Cat-B,and was even more robust than corresponding homogeneous catalyst.This specifically high activity of Cat-A was attributed to the surface Lewis acidity of the thermally activated clay.Models of active surface species were discussed in comparison with silica supported metallocene catalyst.With the directly supported catalyst,molecular weights and melting points of the polymer products were lower than those of the polymer products obtained with Cat-B,and the polymer properties were much more affected by the polymerization temperature.By analyzing the SEM photographs of polymers at different polymerization stages,morphological replication of the single fiber of palygorskite was revealed and a final polyethylene “fiber cluster” structure was formed.This interesting evolution of polymer morphology was further discussed in relation to polyethylene/clay composite and the method of improving the final polymer morphology.

Study of the effect of the nature of catalyst systems on the molecular structure and properties of ultra-high molecular weight polyethylene

PREPARATION OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE USING STRUCTURED NANOPARTICAL ZIEGLER-NATTA CATALYSTS

Rheology of Ultra High Molecular Weight Polystyrene

UHMWPE with Short‐chain Branches Synthesized by Alkenyl Substituted Phenoxy–imine Catalysts in Ethylene Polymerization

Thermal and Mechanical Properties of Ultrahigh-Molecular-Weight Ethylene/1-Hexene Copolymers Prepared by Living Polymerization with Fluorinated Bis(Phenoxy-Imine) Titanium(Iv) Catalyst

Theoretical Study on the High Polymer Molecular Weight of Heteroatom-Substituted Constrained Geometry Catalyst

Preparation of Polypropylene/MMT Nanocomposites Using Complex Supported Catalysts

Ethylene polymerization with metallocene/late transition metal combined catalysts

Synthesis and characterization of titanium(IV) complexes bearing end functionalized biphenyl: Efficient catalysts for synthesizing high molecular weight polyethylene

A Novel Catalytic System of [O,O] Bidentate Titanium Complexes and Et2AlCl/Bu2Mg for the Production of Ultra‐High Molecular Weight Polyethylene

Preparation of Polyethylene Elastomers with Increased High Molecular Weight and Nearly Perfect Strain Recovery by Steric Control of Asymmetric Α-Diimine Nickel Catalyst

Characteristics of Palygorskite Supported Cp_2 TiCl_2 Catalysts for Ethylene Polymerization

Effect of Catalysts Supporting on Tandem Polymerization of Ethylene Stock in Synthesis of Ethylene-1-Hexene Copolymer

Mechanical Properties of Ultra High Molecular Weight Polyethylene Obtained with Different Cocatalyst Systems

Ethylene Polymerization over Supported Vanadium-Magnesium Catalysts with Different Vanadium Content: The Effect of Hydrogen on Molecular Weight Characteristics of the Produced Bimodal Polyethylene

Synthesis of Vanadium (V) Complex with Bulky Phenoxy Ligand and the Study of Catalysis Behavior in Ethylene (Co)polymerization

Ti(IV) Complexes with OSSO-Type Diol Ligands as Catalysts for Synthesis of Ultrahigh-Molecular-Weight Polyethylene and Ethylene–Propylene Copolymers

Synthesis of Polyethylene with Bimodal Molecular Weight Distribution by Supported Iron‐based Catalyst

Reduced Entanglement Density of Ultrahigh-Molecular-Weight Polyethylene Favored by the Isolated Immobilization on the MgCl2 (110) Plane

Improving the performance of a catalytic system for the synthesis of ultra high molecular weight polyethylene with a reduced number of entanglements

New Titanium(IV)-Alkoxide Complexes Bearing Bidentate OO Ligand with the Camphyl Linker as Catalysts for High-Temperature Ethylene Polymerization and Ethylene/1-Octene Copolymerization