Abstract:Hydrogen bond interactions are important for nylon fibers, which improve its mechanical properties and crystallization behavior, while hindering the movement and orientation of the molecular chain during the drawn process. In this study, hexamethylene adipamide was used as the second monomer in copolymerization with ε-caprolactam to obtain copolyamide 6/66 (CoPA), and high-tenacity fibers with a maximum value up to 8.0 cN/dtex were achieved by a multi-step drawn and thermal setting process. Results show that the hexamethylene–adipamide ratio affected the draw ratio (DR) of the as-spun fiber, on the tenacity of final high-performance fiber, and on crystalline. Both DR and tenacity showed evident increases with the hexamethylene–adipamide ratio up to 6% in CoPA and then changed smoothly. However, XRD and DSC results illustrate a decreased tendency with regard to crystallinity. The attenuated in-site total reflection Fourier transform infrared (ATR-FTIR) spectra were used to study the hydrogen bond interaction between the C=O group and N–H group and the crystal form of the fiber. Results show that the copolymerization destroyed the regularity of the main chain of CoPA and reduces the interaction of interstrand hydrogen bonds, facilitating the formation of the γ-crystalline form in as-spun fibers, fulfilling the transition from the γ to α crystalline form during the fiber-drawing step because of the release of the C=O group and N–H group from the hydrogen bond interaction at an elevated temperature close to the molten temperature of CoPA, and then reforming during the thermal-setting step which soiled the crystalline and improved the tenacity of the fiber. The copolymerization with a homologous monomer regulates the hydrogen bond interaction, fulfills the high drawn ratio and high tenacity fiber, and provides a new route for high-performance fiber preparation using traditional fiber formation of polymers.

Preparation of High‐modulus and High‐strength Isotactic Polypropylene Fiber by Zone‐annealing Method

Preparation of High-Modulus and High-Strength Poly(Ethylene-Terephthalate) Fiber by Zone Annealing

Preparation of High-Modulus Nylon-6 Fibre by an Improved Zone-Annealing Method

Preparation of High‐modulus and High‐strength Poly(ethylene Terephthalate) Film by Zone‐annealing Method

Preparation of Ultra-High Modulus Polyethylene Films by the Zone-Annealing Method

Combined Processing of Polypropylene Film by Coextrusion and Zone‐annealing

Application of a High-Tension Annealing Method to Nylon 66 Fibres

Preparation of High-Modulus Poly(ethylene Terephthalate) Fibers by Vibrating Hot Drawing

Application of Annealing under Extremely High Tension to Nylon 6 Fibers.

Carbon Dioxide Induced Crystallization for Toughening Polypropylene

Structure and Properties of a Metallocene Polypropylene Resin with Low Melting Temperature for Melt Spinning Fiber Application.

Ultra high density carbon fiber derived from isotactic polypropylene fiber without skin‐core structure

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Molecular Orientations and True Stress−Strain Relationship in Isotactic Polypropylene Film

Discrete molecular weight strategy modulates hydrogen bonding‐induced crystallization and chain orientation for melt‐spun high‐strength polyamide fibers

Preparation of Elastic Poly(R-3-Hydroxybutyrate-Co-R-3-Hydroxyhexanoate) Fiber with High Strength and Regulation of Its Mechanical Properties

Morphology and Mechanical Behavior of Isotactic Polypropylene (ipp)/syndiotactic Polypropylene (spp) Blends and Fibers

Copolymerization-Regulated Hydrogen Bonds: A New Routine for High-Strength Copolyamide 6/66 Fibers

Crystalline grain refinement toughened isotactic polypropylene through rapid quenching of stretched melt

A Scanning Electron Microscopy Study On The Morphologies Of Isotactic Polypropylene Induced By Its Own Fibers

Formation of highly oriented crystalline structure for polyoxymethylene fiber enables superior intrinsic thermal conductivity